Saleh, Tawfik A.Tuzen, MustafaSari, AhmetAltunay, Nail2024-10-262024-10-2620220263-87621744-3563https://doi.org/10.1016/j.cherd.2022.04.042https://hdl.handle.net/20.500.12418/30392In this work, expanded perlite (EP) was modified with a polymer of trimesoyl chloride and phenylenediamine, and evaluated as a novel competent adsorbent for aquatic arsenic (As (III)) removal. The chemical structure and morphology of the developed polymer-modified EP (PM-EP) adsorbent were investigated by Fourier transform infrared spectroscopy, as well as scanning electron microscope /energy equipped with dispersive X-ray spectroscope. The conditions of batch removal such as the solution pH, contact time, sorbent dosage, and initial As(III) concentration were analyzed by factorial design. Based on the non-linear and linear Langmuir model that well correlates equilibrium data, the removal capacity of the produced PM-EP adsorbent was estimated as 447.9 mg g-1 and 454.5 mg g-1, respectively at optimized conditions (pH: 6; contact time: 60 min; adsorbent dosage: 10 g L-1 and temperature: 24 degrees C). The As(III) adsorption mechanism onto PM-EP adsorbent was well described by the non-linear pseudo-second-order kinetic model. The prepared PM-EP adsorbent was subjected to a ten cycling-adsorption/desorption test and the results demonstrated that it had appreciated reuse performance until seven cycles. The removal efficiency of PM-EP was determined in the case of wastewater samples. The overall evaluation suggested that the synthesized PM-EP adsorbent could be a powerful alternative adsorbent for decontamination of As(III) ions from wastewaters and drinking waters.(c) 2022 Institution of Chemical Engineers. Published by Elsevier Ltd. All rights reserved.en10.1016/j.cherd.2022.04.042info:eu-repo/semantics/openAccessPolymerizationToxic pollutantsAdsorptionKineticWastewaterArticle1831911812-s2.0-85130600657Q2WOS:000807708900007Q2