In this study, metallurgical properties of AISI 1040 steel and high-chromium white cast iron joined using friction welding process was investigated experimentally. Scanning electron microscopy, optical microscopy, ...

Fe-MoNiAl-Al2O3 powders were mechanically alloyed by a SPEX type attritor. The Fe based composite samples were reinforced with complex mechanically alloyed Fe-MoNiAl-Al2O3 particles in different ratios and Fe matrix ...

In this study, the effect of friction time on microstructure and weldability of AISI 1030 steel with nickel interlayer and high chromium white cast iron welded by the friction welding method were investigated experimentally. ...

6xxx series of aluminum alloys are prone to cracking when fusion welded without a proper filler metal. Alternatively, these alloys can be welded by rotary friction welding, a solid-state welding process, without using ...

In this study, AISI 430 and HARDOX 450 grade steel are joined using a double-sided tungsten inert gas welding process. The microstructural properties of weld metal and HAZ were evaluated by optical microscopy, energy ...

AISI 430 and HARDOX 450 grades were combined using tungsten inert gas double-sided welding process. Microstructural changes were evaluated with scanning electron microscope, energy dispersive spectrometry, electron back ...

Cu-based FeTi-reinforced metal matrix composites (MMCs) were produced with FeTi reinforcement additions of 6, 9, 12, 15 and 18wt.% by powder metallurgy. Microstructural characterization of Cu-based FeTi-reinforced composites ...

The effect of austempering treatment on metallurgical structure of X210Cr12 cold work tool steel inoculated with Ce was researched. Microstructural changes, elemental characterizations, and phase formations of the samples ...

In this study, cementation steel was boronized at 1050∘C for 6h, 8h, and 10h. Microstructural change on the surface of the samples after boronization was detected by optical microscope (OM), scanning electron microscope ...

Cu\Fe–Cr–C metal matrix composites (MMCs) were produced with a reinforcer addition of 6, 9, 12, 15, and 18 wt% Fe–Cr–C by powder metallurgy. The effects of sintering temperatures on Cu-based Fe–Cr–C-reinforced composites ...