dc.contributor.author | Oztop, Hakan F. | |
dc.contributor.author | Varol, Yasin | |
dc.contributor.author | Alnak, Dogan E. | |
dc.date.accessioned | 2019-07-27T12:10:23Z | |
dc.date.accessioned | 2019-07-28T10:14:02Z | |
dc.date.available | 2019-07-27T12:10:23Z | |
dc.date.available | 2019-07-28T10:14:02Z | |
dc.date.issued | 2009 | |
dc.identifier.issn | 0735-1933 | |
dc.identifier.issn | 1879-0178 | |
dc.identifier.uri | https://dx.doi.org/10.1016/j.icheatmasstransfer.2009.05.006 | |
dc.identifier.uri | https://hdl.handle.net/20.500.12418/10042 | |
dc.description | WOS: 000270077700015 | en_US |
dc.description.abstract | Control of laminar, two-dimensional, steady forced convection heat transfer and fluid flow in an isothermally heated blocks located in a channel was analyzed numerically. The channel had three blocks attached on its bottom wall. The cooling air entered the channel with uniform velocity. A triangular cross-sectional bar was used as a control element. Both the top wall of the channel and the bar were isothermal. The bar was located in two different points in the y-direction and these parameters were tested at three different Reynolds numbers ranging between (400 <= Re <= 1300). Results were also compared for no triangle case. It was obtained that insertion of a triangular cross-sectional bar enhanced the heat transfer for all Reynolds numbers and the best heat transfer was observed for the position of the bar with y = 3.5. (C) 2009 Elsevier Ltd. All rights reserved. | en_US |
dc.language.iso | eng | en_US |
dc.publisher | PERGAMON-ELSEVIER SCIENCE LTD | en_US |
dc.relation.isversionof | 10.1016/j.icheatmasstransfer.2009.05.006 | en_US |
dc.rights | info:eu-repo/semantics/closedAccess | en_US |
dc.subject | Heat transfer | en_US |
dc.subject | Triangular bar | en_US |
dc.subject | Heated block | en_US |
dc.title | Control of heat transfer and fluid flow using a triangular bar in heated blocks located in a channel | en_US |
dc.type | article | en_US |
dc.relation.journal | INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER | en_US |
dc.contributor.department | [Oztop, Hakan F. -- Varol, Yasin] Firat Univ, Dept Mech Educ, TR-23119 Elazig, Turkey -- [Alnak, Dogan E.] Cumhuriyet Univ, Dept Mech Educ, TR-58140 Sivas, Turkey | en_US |
dc.contributor.authorID | Varol, Yasin -- 0000-0003-2989-7125 | en_US |
dc.identifier.volume | 36 | en_US |
dc.identifier.issue | 8 | en_US |
dc.identifier.endpage | 885 | en_US |
dc.identifier.startpage | 878 | en_US |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |