Search
Now showing items 1-10 of 41
Experimental and numerical evaluation of combustion analysis of a DI diesel engine
(Elsevier, 2021)
In this study investigated both experimentally and numerically in detail the combustion characteristics
of a diesel engine operating with biodiesel fuel produced from fig seed oil at full load and different
speeds. The ...
Fatigue Life and Stress Analysis of the Crankshaft of a Single Cylinder Diesel Engine under Variable Forces and Speeds
(De Gruyter, 2021)
In this paper, a single cylinder crankshaft manufactured with
C45 steel was used to investigate variation in stress, deformation,
and fatigue life and safety factor at critical locations of the crankshaft.
For this ...
A Numerical Investigation of Heat Transfer from Heated Surfaces of Different Shapes
(2021)
—The object of this study was cooling of inverted and plain triangular profile copper
surfaces at a constant heat flux of 1000 W/m2. The cooling of these triangular profile surfaces
placed at the bottom of a rectangular ...
The effect of outlet location on heat transfer performance in micro pin-fin cooling used for a CPU
(2021)
In this study, the simulation of the coolant flow using micro-pin fins in the CPU
heat sink was numerically presented with ANSYS-Fluent, a Computational Fluid Dynamics
(CFD) program. Four different inlet–outlet configurations ...
Metallurgical and Mechanical Characteristics of Friction Welded Joint of 27 wt.%CrWCI/AISI 1040 Steel
(www.springer.com, 2021)
In this study, metallurgical properties of AISI 1040 steel and high-chromium white cast iron joined using
friction welding process was investigated experimentally. Scanning electron microscopy, optical microscopy, ...
Characterization of mechanically alloyed Fe based and MoNiAl+Al2O3 reinforced composites
(https://www.degruyter.com, 2021)
Fe-MoNiAl-Al2O3 powders were mechanically alloyed by a SPEX type attritor. The Fe based composite samples were reinforced with complex mechanically alloyed Fe-MoNiAl-Al2O3 particles in different ratios and Fe matrix ...
Friction welding of high Cr white cast iron to AISI 1030 steel with Ni interlayer
(https://www.degruyter.com, 2021)
In this study, the effect of friction time on microstructure and weldability of AISI 1030 steel with nickel interlayer and high chromium white cast iron welded by the friction welding method were investigated
experimentally. ...
Effect of rotary friction welding on mechanical properties of 6060 Al alloy
(https://revistademetalurgia.revistas.csic.es, 2021)
6xxx series of aluminum alloys are prone to cracking when fusion welded without a proper filler metal. Alternatively, these alloys can be welded by rotary friction welding, a solid-state welding process,
without using ...
Heat affected zone and weld metal analysis of HARDOX 450 and ferritic stainless steel double sided TIG-joints
(https://www.degruyter.com, 2021)
In this study, AISI 430 and HARDOX 450 grade steel are joined using a double-sided tungsten inert gas welding process. The microstructural properties of weld metal and HAZ were evaluated by optical microscopy, energy ...
Analysis of different combustion chamber geometries using hydrogen / diesel fuel in a diesel engine
(Taylor Francis, 2021)
In this study, the effects on combustion characteristics and emission were
investigated in a direct injection diesel engine. In experimental and numerical
studies, the engine was operated at 2000 rpm. The analyzes were ...