Search
Now showing items 41-50 of 52
Microstructure and wear analysis of CoWC alloy layers deposited by PTA process
(EDP SCIENCES S A17, AVE DU HOGGAR, PA COURTABOEUF, BP 112, F-91944 LES ULIS CEDEX A, FRANCE, 12 April 2)
CoWC composite coatings were produced on AISI 430 steel by the plasma transfer arc cladding. Three different powder mixtures containing WC (90%, 85% and 80%) and Co (10%, 15% and 20%) were used. Phase composition, ...
Effect of alloying elements on mechanical behaviour of Cu-Zn-Sn bronzes
(WALTER DE GRUYTER GMBHGENTHINER STRASSE 13, D-10785 BERLIN, GERMANY, 8 March 20)
The effect of Fe, P and Mn on microstructure and fatigue properties of CuZnSn bronzes investigated with
optical microscopy and scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction, hardness, ...
Austempering Ce-La inoculated solution strengthened ferritic ductile cast irons
(REDAKCIA KOVOVE MATERIALYUL RACIANSKA 75, PO BOX 95, 830 08 BRATISLAVA 38, SLOVAKIA, 01 Februar)
The influence of austempering conditions on the microstructure, hardness, tensile strength, and impact toughness of Ce-La inoculated solution-strengthened ferritic ductile irons was analyzed. The austempering was performed ...
Structural analysis of Cu-based FeCr reinforced composites prepared by mechanical alloying
(WALTER DE GRUYTER GMBHGENTHINER STRASSE 13, D-10785 BERLIN, GERMANY, 01 July 20)
Production and structural investigations of Cu-based FeCr reinforced composite were performed by using mechanical alloying, optical microscope, scanning electron microscope, X-ray diffraction and hardness
test. The increment ...
Weldability and mechanical behavior of CMT welded AISI 430 and HARDOX 500 steels
(WALTER DE GRUYTER GMBHGENTHINER STRASSE 13, D-10785 BERLIN, GERMANY, 31 August )
In this study, AISI 430 and HARDOX 500 steels were joined by cold metal transfer (CMT) welding method.
The properties and microstructural changes of the welding and HAZ regions were investigated by OM and SEM analyses. ...
THE EFFECT OF FIN ANGLE ON INCREASING THE HEAT TRANSFER FROM ELECTRONIC COMPONENTS BY APPLYING AN IMPINGING JET-CROSS FLOW
(12.11.2021)
With the advancement of technology, circuit elements in developing electronic devices heat up and their temperatures rise depending on the working load. Cross flow, which is one of the methods used to increase heat transfer ...
Farklı Desenli Bakır Plakaların Birleşik Jet Akışı ile Soğutulmasında Grafen Oksit (GO)-Su Nanoakışkanının Etkisi
(2023)
Bu çalışmada, kanallarda bulunan sabit 1000 W/m2 ısı akılı küp ve oyuklu desenlerin su ve %0,02 hacimsel nanoparçacık konsantrasyonlu GO (Grafen Oksit)-Su nanoakışkanı kullanılarak birleşik jet akışı ile soğutulması sayısal ...
Nanoakışkan Kullanılan Birleşik Jet Akışlı ve Kanatçıklı Kanallarda Isı Transferi ve Performans Değerlendirme Sayısının İncelenmesi
(2022)
Bu çalışmada, birleşik jet akışlı kanallarda bulunan sabit ısı akılı küp ve dairesel oyuklu desenlerden olan ısı transferi su ve %0,02 hacimsel konsantrasyonlu GO (Grafen Oksit)-Su nanoakışkanı kullanılarak sayısal olarak ...
Research of cooling performance in combined jet flow channels using different nanofluids
(15.01.2023)
In this work, heat transfer from the cube and circular hollow-shaped copper plate surfaces with a constant heat flux of 1000 W/m2 was numerically investigated by using a combination of the cross-flow-impinging jet. Numerical ...
Grafen Oksit (GO)-Su Nanoakışkanlı ve Kanatçıklı Birleşik Jet Akışlı Kanallarda Isı Transferinin Araştırılması
(2023)
Bu çalışmada, birleşik jet akışıyla kanatçıksız ve farklı kanatçık mesafeli (N = D ve 2D) ve 60o açılı kanal-larda su ve %0.02 hacimsel konsantrasyonlu GO (Grafen Oksit)-Su nanoakışkanı kullanılmasıyla yamuk ve taç desenli ...