| dc.contributor.author | Varol, Yasin | |
| dc.contributor.author | Alnak, Dogan E. | |
| dc.contributor.author | Oztop, Hakan F. | |
| dc.contributor.author | Al-Salem, Khaled | |
| dc.date.accessioned | 2019-07-27T12:10:23Z | |
| dc.date.accessioned | 2019-07-28T10:03:44Z | |
| dc.date.available | 2019-07-27T12:10:23Z | |
| dc.date.available | 2019-07-28T10:03:44Z | |
| dc.date.issued | 2012 | |
| dc.identifier.issn | 0735-1933 | |
| dc.identifier.issn | 1879-0178 | |
| dc.identifier.uri | https://dx.doi.org/10.1016/j.icheatmasstransfer.2012.03.006 | |
| dc.identifier.uri | https://hdl.handle.net/20.500.12418/9136 | |
| dc.description | WOS: 000306299100022 | en_US |
| dc.description.abstract | A numerical investigation has been performed two-dimensional slot impingement onto two heated cylinders with different diameters turbulent flow conditions. Height of slot jet is taken as constant for all cases. The study is performed to see the effects of effective parameters on heat and fluid flow as jet Reynolds number (11,000 <= Re <= 20,000), diameter ratio of cylinders (0.5 <= D-1/D-2 <= 1.5) and ratio of distance between cylinders to slot jet high (L/S). Streamlines, isotherms, local and mean Nusselt numbers and Cd coefficient were obtained. These results were compared with earlier experimental and numerical works and good agreement was obtained. It is found that diameter ratios of cylinders can be a control element for heat and fluid flow. (C) 2012 Elsevier Ltd. All rights reserved. | en_US |
| dc.language.iso | eng | en_US |
| dc.publisher | PERGAMON-ELSEVIER SCIENCE LTD | en_US |
| dc.relation.isversionof | 10.1016/j.icheatmasstransfer.2012.03.006 | en_US |
| dc.rights | info:eu-repo/semantics/closedAccess | en_US |
| dc.subject | Jet impingement | en_US |
| dc.subject | Turbulent flow | en_US |
| dc.subject | Heat transfer | en_US |
| dc.subject | Cooling | en_US |
| dc.title | Numerical analysis of heat transfer due to slot jets impingement onto two cylinders with different diameters | en_US |
| dc.type | article | en_US |
| dc.relation.journal | INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER | en_US |
| dc.contributor.department | [Varol, Yasin] Tennessee State Univ, Dept Comp Sci, Nashville, TN 37209 USA -- [Alnak, Dogan E.] Cumhuriyet Univ, Dept Mech Educ, TR-58140 Sivas, Turkey -- [Oztop, Hakan F.] Firat Univ, Dept Mech Engn, Fac Technol, TR-23119 Elazig, Turkey -- [Al-Salem, Khaled] King Saud Univ, Dept Mech Eng, Coll Engn, Riyadh, Saudi Arabia | en_US |
| dc.contributor.authorID | Varol, Yasin -- 0000-0003-2989-7125 | en_US |
| dc.identifier.volume | 39 | en_US |
| dc.identifier.issue | 5 | en_US |
| dc.identifier.endpage | 735 | en_US |
| dc.identifier.startpage | 726 | en_US |
| dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |
