Show simple item record

dc.contributor.authorHubbezoglu, Ihsan
dc.contributor.authorBolayir, Giray
dc.contributor.authorDogan, Orhan Murat
dc.contributor.authorDogan, Arife
dc.contributor.authorOzer, Ali
dc.contributor.authorBek, Buelent
dc.date.accessioned2019-07-27T12:10:23Z
dc.date.accessioned2019-07-28T10:15:59Z
dc.date.available2019-07-27T12:10:23Z
dc.date.available2019-07-28T10:15:59Z
dc.date.issued2007
dc.identifier.issn0287-4547
dc.identifier.urihttps://dx.doi.org/10.4012/dmj.26.845
dc.identifier.urihttps://hdl.handle.net/20.500.12418/10506
dc.descriptionWOS: 000252537100012en_US
dc.descriptionPubMed ID: 18203490en_US
dc.description.abstractThis study examined the surface microhardness of four kinds of resin composites with different fillers and resin matrices. Ten specimens of 2 mm thickness and 4 mm diameter of each resin composite were polymerized using a halogen light, a blue light-emitted diode, and a plasma are unit. Microhardness evaluation was performed at top and bottom surfaces for each specimen using a Vickers microhardness tester. Furthermore, morphologies of the polished top surfaces of composites cured with blue ligbt-emitted diode were observed using scanning electron microscopy. Results indicated that composites cured with halogen or blue light-emitted diode light yielded higher microhardness values, although it also appeared to depend on the type of composite cured. Plasma arc curing according to manufacturer's instructions yielded the lowest microhardness values for all the materials. Among the materials tested, the nanofilled resin composite displayed the highest microhardness values for each curing regime.en_US
dc.language.isoengen_US
dc.publisherJAPANESE SOC DENTAL MATERIALS DEVICESen_US
dc.relation.isversionof10.4012/dmj.26.845en_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectmicrohardnessen_US
dc.subjectresin compositeen_US
dc.subjectlight curing uniten_US
dc.titleMicrohardness evaluation of resin composites polymerized by three different light sourcesen_US
dc.typearticleen_US
dc.relation.journalDENTAL MATERIALS JOURNALen_US
dc.contributor.department[Dogan, Arife] Gazi Univ, Fac Dent, Dept Prosthodont, Ankara, Turkey -- [Hubbezoglu, Ihsan] Cumhuriyet Univ, Fac Dent, Dept Endodont, Sivas, Turkey -- [Bolayir, Giray -- Dogan, Orhan Murat -- Bek, Buelent] Cumhuriyet Univ, Fac Dent, Dept Prosthodont, Sivas, Turkey -- [Ozer, Ali] Cumhuriyet Univ, Fac Engn, Sivas, Turkeyen_US
dc.identifier.volume26en_US
dc.identifier.issue6en_US
dc.identifier.endpage853en_US
dc.identifier.startpage845en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record