dc.contributor.author | Şahin Y. | |
dc.contributor.author | Öksüz K.E. | |
dc.date.accessioned | 2019-07-27T12:10:23Z | |
dc.date.accessioned | 2019-07-28T09:14:06Z | |
dc.date.available | 2019-07-27T12:10:23Z | |
dc.date.available | 2019-07-28T09:14:06Z | |
dc.date.issued | 2012 | |
dc.identifier.isbn | 9783037855140 | |
dc.identifier.issn | 1660-9336 | |
dc.identifier.uri | https://dx.doi.org/10.4028/www.scientific.net/AMM.232.39 | |
dc.identifier.uri | https://hdl.handle.net/20.500.12418/4861 | |
dc.description | 7 July 2012 through 8 July 2012 -- Paris -- 94582 | en_US |
dc.description.abstract | Aluminium alloys (Al2014 and Al2124 alloy) and their composites containing 10wt.% Al2O3 with 3 ?m and 43 ?m sizes of particles have been produced by powder metallurgy (PM) method and the microstructure and hardness were investigated. Scanning electron microscopy (SEM) investigation showed a nearly uniform distribution of the Al2O3 particles within the Al2124 alloy matrix although some porosities were found in the Al2014 alloy matrix. Furthermore, it was found that the macrohardness of Al2124 alloy composite improved highly in comparison to that of Al2014 alloy due to fine of microstructure and increased hardness. The hardnesses of both MMCs increased with increasing the particle sizes. © (2012) Trans Tech Publications, Switzerland. | en_US |
dc.description.sponsorship | Şahin, Y.; Department of Manufacturing Engineering, Gazi University, Besevler-06500, Ankara, Turkey; email: ysahin@gazi.edu.t | en_US |
dc.language.iso | eng | en_US |
dc.publisher | 2012 3rd International Conference on Mechanical and Aerospace Engineering, ICMAE 2012 | en_US |
dc.relation.isversionof | 10.4028/www.scientific.net/AMM.232.39 | en_US |
dc.rights | info:eu-repo/semantics/closedAccess | en_US |
dc.subject | Al2014 alloy | en_US |
dc.subject | Al2124 alloy | en_US |
dc.subject | Al2O3 | en_US |
dc.subject | Hardness | en_US |
dc.subject | Metal matrix composite | en_US |
dc.subject | Powder metallurgy | en_US |
dc.title | The microstructure and hardness of Al2O3 particle reinforced composite | en_US |
dc.type | conferenceObject | en_US |
dc.relation.journal | Applied Mechanics and Materials | en_US |
dc.contributor.department | Şahin, Y., Department of Manufacturing Engineering, Gazi University, Besevler-06500, Ankara, Turkey -- Öksüz, K.E., Department of Metallurgical and Materials Engineering Cumhuriyet University, 58140, Sivas, Turkey | en_US |
dc.identifier.volume | 232 | en_US |
dc.identifier.endpage | 44 | en_US |
dc.identifier.startpage | 39 | en_US |
dc.relation.publicationcategory | Konferans Öğesi - Uluslararası - Kurum Öğretim Elemanı | en_US |