dc.contributor.author | Şahin Y. | |
dc.contributor.author | EmreÖksüz K. | |
dc.contributor.author | Şimşir M. | |
dc.date.accessioned | 2019-07-27T12:10:23Z | |
dc.date.accessioned | 2019-07-28T09:14:29Z | |
dc.date.available | 2019-07-27T12:10:23Z | |
dc.date.available | 2019-07-28T09:14:29Z | |
dc.date.issued | 2012 | |
dc.identifier.isbn | 9783037853702 | |
dc.identifier.issn | 1022-6680 | |
dc.identifier.uri | https://hdl.handle.net/20.500.12418/4934 | |
dc.description | 27 March 2012 through 29 March 2012 -- Xiamen -- 88970 | en_US |
dc.description.abstract | Fe-Co based diamond-reinforced composites (D-MMCs)and diamond+SiC- reinforcedcomposites (D+SiC-MMCs) were produced by cold pressing method. Investigation of the wear behaviorson two-body abrasive wear behavior of the composites were carried out under different conditions. 2 k factorial designs of experiments were used to obtain the data in a controlled way. The wear parameters studied were sliding speed, load andsliding distance. An orthogonal array and analysis of variance (ANOVA) were employed to investigate the influence of process parameters on the wear resistance of these composites. The results indicated that the incorporation of SiC particles in the metal matrix as a secondary reinforcement increased the wear resistance. In addition to this, the applied loadhad the significant effecton the weight loss of both types of composites. Furthermore, a correlation was derived from the results of the experimental design by multiple regressions. Finally, confirmation of experiment was conducted to verify the predicted model. © (2012) Trans Tech Publications. | en_US |
dc.description.sponsorship | Şahin, Y.; Gazi University, Manufacturing Engineering Department, Faculty of Technology, 06500 Ankara, Turkey; email: ysahin@gazi.edu.tr | en_US |
dc.language.iso | eng | en_US |
dc.publisher | 3rd international Conference on Manufacturing Science and Engineering, ICMSE 2012 | en_US |
dc.rights | info:eu-repo/semantics/closedAccess | en_US |
dc.subject | Abrasive wear | en_US |
dc.subject | D-MMCs | en_US |
dc.subject | Diamond | en_US |
dc.subject | Powder metallurgy | en_US |
dc.subject | SiC | en_US |
dc.subject | SiC-MMCs | en_US |
dc.title | Wear behavior of diamond+SiCp-reinforced metal matrix composite by Taguchi method | en_US |
dc.type | conferenceObject | en_US |
dc.relation.journal | Advanced Materials Research | en_US |
dc.contributor.department | Şahin, Y., Gazi University, Manufacturing Engineering Department, Faculty of Technology, 06500 Ankara, Turkey -- EmreÖksüz, K., Cumhuriyet University, Metallurgical and Materials Engineering Department, 58140, Sivas, Turkey -- Şimşir, M., Cumhuriyet University, Metallurgical and Materials Engineering Department, 58140, Sivas, Turkey | en_US |
dc.identifier.volume | 472-475 | en_US |
dc.identifier.endpage | 1318 | en_US |
dc.identifier.startpage | 1309 | en_US |
dc.relation.publicationcategory | Konferans Öğesi - Uluslararası - Kurum Öğretim Elemanı | en_US |