dc.contributor.author | Şimşir M. | |
dc.contributor.author | Selçuk B. | |
dc.contributor.author | Aslan N. | |
dc.date.accessioned | 2019-07-27T12:10:23Z | |
dc.date.accessioned | 2019-07-28T09:31:45Z | |
dc.date.available | 2019-07-27T12:10:23Z | |
dc.date.available | 2019-07-28T09:31:45Z | |
dc.date.issued | 2015 | |
dc.identifier.issn | 2374068X | |
dc.identifier.uri | https://dx.doi.org/10.1080/2374068X.2016.1143209 | |
dc.identifier.uri | https://hdl.handle.net/20.500.12418/5336 | |
dc.description | Taylor and Francis Ltd. | en_US |
dc.description.abstract | The aim of this study is to investigate the effect of working parameters on wear resistance of steels in terms of applied load, hardness and revolution per minute (rpm) using the Taguchi method. Pin-on-roller type of apparatus was used for adhesive wear tests. The operating parameters were investigated by employing the orthogonal array, signal-to-noise ratio and analysis of variance. The experimental wear test results show that the hardness of the materials is the major parameter among the controllable factors. After the hardness, the applied load and the rpm sequentially have influence on the wear resistance of three types of steels; AISI 1050, AISI 4140 and AISI 8620. The best wear testing parameters were determined for current conditions of the steels. A good agreement between the predicted and experimental wear amounts is observed. © 2016, © 2016 Taylor & Francis. | en_US |
dc.description.sponsorship | Şimşir, M.; Department of Metallurgical and Materials Engineering, Cumhuriyet UniversityTurkey; email: msimsir@cumhuriyet.edu.tr | en_US |
dc.language.iso | eng | en_US |
dc.relation.isversionof | 10.1080/2374068X.2016.1143209 | en_US |
dc.rights | info:eu-repo/semantics/closedAccess | en_US |
dc.subject | material property | en_US |
dc.subject | statistical analysis | en_US |
dc.subject | steel | en_US |
dc.subject | Wear testing | en_US |
dc.title | Investigating the effect of testing parameters on adhesive wear using Taguchi method | en_US |
dc.type | article | en_US |
dc.relation.journal | Advances in Materials and Processing Technologies | en_US |
dc.contributor.department | Şimşir, M., Department of Metallurgical and Materials Engineering, Cumhuriyet University, Sivas, Turkey -- Selçuk, B., Department of Mechanical Engineering, Cumhuriyet University, Sivas, Turkey -- Aslan, N., Department of Mining Engineering, Cumhuriyet University, Sivas, Turkey | en_US |
dc.identifier.volume | 1 | en_US |
dc.identifier.issue | 03.Apr | en_US |
dc.identifier.endpage | 507 | en_US |
dc.identifier.startpage | 493 | en_US |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |