Show simple item record

dc.contributor.authorKursun, Hulya
dc.date.accessioned2019-07-27T12:10:23Z
dc.date.accessioned2019-07-28T09:44:22Z
dc.date.available2019-07-27T12:10:23Z
dc.date.available2019-07-28T09:44:22Z
dc.date.issued2017
dc.identifier.issn0149-6395
dc.identifier.issn1520-5754
dc.identifier.urihttps://dx.doi.org/10.1080/01496395.2016.1267215
dc.identifier.urihttps://hdl.handle.net/20.500.12418/7041
dc.descriptionWOS: 000395170600013en_US
dc.description.abstractEntrainment which is the characteristic feature of fine particles is closely related to water recovery. It is based on the changes depending on the establishment of linear relationship between water recovery and solid recovery. This paper deals with the investigation of the effect of frother types and concentrations on fine particles' entrainment using column flotation. Entrainment of fine particle using a mixture of artificial ore (celestite:calcite; 1:1) was investigated in column flotation. In a two-phase system (water/air), the variation of bubble diameters and gas hold-up with a superficial air rates using different frother types and concentrations were tested. The results showed that the frother types and concentrations had significant effect on the grade and recovery, superficial air rate, gas hold-up and fine gangue entrainment. Entrainment factors for frother types and concentrations were compared in flotation column. Kirjaveinen([11]) model was used for describing the specific entrained factor (P-i) of hydrophilic particles. It has been found that Kirjaveinen model supports the results of this study.en_US
dc.language.isoengen_US
dc.publisherTAYLOR & FRANCIS INCen_US
dc.relation.isversionof10.1080/01496395.2016.1267215en_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectCalciteen_US
dc.subjectcelestiteen_US
dc.subjectentrainmenten_US
dc.subjectfrothersen_US
dc.subjectcolumn flotationen_US
dc.titleThe influence of frother types and concentrations on fine particles' entrainment using column flotationen_US
dc.typearticleen_US
dc.relation.journalSEPARATION SCIENCE AND TECHNOLOGYen_US
dc.contributor.department[Kursun, Hulya] Cumhuriyet Univ, Dept Mat & Met Engn, TR-58140 Sivas, Turkeyen_US
dc.identifier.volume52en_US
dc.identifier.issue4en_US
dc.identifier.endpage731en_US
dc.identifier.startpage722en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record