Show simple item record

dc.contributor.authorDaldaban, Ferhat
dc.contributor.authorSari, Vekil
dc.date.accessioned2019-07-27T12:10:23Z
dc.date.accessioned2019-07-28T09:56:24Z
dc.date.available2019-07-27T12:10:23Z
dc.date.available2019-07-28T09:56:24Z
dc.date.issued2015
dc.identifier.issn1300-1884
dc.identifier.issn1304-4915
dc.identifier.urihttps://hdl.handle.net/20.500.12418/7989
dc.descriptionWOS: 000368517800007en_US
dc.description.abstractIn this study, two dimensional model of a single-coil reluctance launcher was constructed via Maxwell software which uses Finite Elements Method as a solver. The effects of projectile parameters on muzzle velocity were examined with the constructed model. Projectile parameters were determined when the muzzle velocity is at its highest value. The studied projectile parameters are the material, diameter and the length of the projectile. Analysis of the reluctance launcher was carried out for each parameter. As a result of the analysis it was determined that the velocity of the projectile increases as the relative magnetic permeability of the material increases. Higher velocities are obtained when the diameter of the projectile is the half of the muzzle diameter and the length of the projectile is equal to or a bit longer than the length of the coil. The highest velocity was obtained with the 8 cm length, 3 mm diameter projectile constructed from 1050 material. The highest velocity is 19.76 m/sec. The tube-type projectile was also studied with in this study. In contrast to the past studies, It was determined that the velocity of the projectile increases when it is tube type. The obtained velocity value is 22.08 m/sec. in this case. 250 V DC voltage is applied to the model.en_US
dc.language.isoturen_US
dc.publisherGAZI UNIV, FAC ENGINEERING ARCHITECTUREen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectCoilgunen_US
dc.subjectlinear acceleratorsen_US
dc.subjectreluctance launcheren_US
dc.subjectfinite elements analysisen_US
dc.subjectMaxwell simulationen_US
dc.titleANALYSIS OF A RELUCTANCE LAUNCHER BY FINITE ELEMENTS METHODen_US
dc.typearticleen_US
dc.relation.journalJOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITYen_US
dc.contributor.department[Daldaban, Ferhat] Erciyes Univ, Muhendislik Fak, Elekt Elekt Muhendisligi Bolumu, TR-38039 Kayseri, Turkey -- [Sari, Vekil] Cumhuriyet Univ, Muhendislik Fak, Elekt Elekt Muhendisligi Bolumu, TR-58140 Sivas, Turkeyen_US
dc.identifier.volume30en_US
dc.identifier.issue4en_US
dc.identifier.endpage614en_US
dc.identifier.startpage605en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record