dc.contributor.author | Sariisik, A. | |
dc.contributor.author | Akdas, H. | |
dc.contributor.author | Sariisik, G. | |
dc.contributor.author | Coskun, G. | |
dc.date.accessioned | 2019-07-27T12:10:23Z | |
dc.date.accessioned | 2019-07-28T10:05:14Z | |
dc.date.available | 2019-07-27T12:10:23Z | |
dc.date.available | 2019-07-28T10:05:14Z | |
dc.date.issued | 2011 | |
dc.identifier.issn | 0090-3973 | |
dc.identifier.issn | 1945-7553 | |
dc.identifier.uri | https://dx.doi.org/10.1520/JTE103702 | |
dc.identifier.uri | https://hdl.handle.net/20.500.12418/9479 | |
dc.description | WOS: 000296598400021 | en_US |
dc.description.abstract | The present work attempts to determine the most suitable surface processing techniques to reduce the slipping risk of pedestrians while walking barefoot and wearing shoes on marble coverings. In this study, slip angles of surface-processed marbles in different plate dimensions have been determined by using DIN EN 51097, DIN EN 51130, and TS EN 14231 Standards "The determination of the characteristics that reduce slipping on wet, barefoot surfaces." Slip angles and surface slip resistances have been determined by using ramp test equipment and pendulum method on five different types of classified marbles applied polishing and honing surface processing techniques. It was found that the parameters which affected slip resistance and slip angle values of the marbles were plate size and the applied surface processing techniques. The marbles were then grouped according to safe utilization places depending on slip angles and slip resistances, according to the statistical results. | en_US |
dc.description.sponsorship | Afyon Kocatepe University Scientific Research Committee [0.41.MUH.01, 08.MUH.11]; Eskisehir Osmangazi University Scientific Research Projects Committee [201015016]; TUBITAK-1002 Project [108M624] | en_US |
dc.description.sponsorship | This study was supported by Afyon Kocatepe University Scientific Research Committee (Project No. 0.41.MUH.01 and 08.MUH.11), Eskisehir Osmangazi University Scientific Research Projects Committee's decision dated April 30, 2010, numbered 14 (Project No. 201015016) and by TUBITAK-1002 Project (Project No. 108M624). We would like to thank for their contributions. | en_US |
dc.language.iso | eng | en_US |
dc.publisher | AMER SOC TESTING MATERIALS | en_US |
dc.relation.isversionof | 10.1520/JTE103702 | en_US |
dc.rights | info:eu-repo/semantics/closedAccess | en_US |
dc.subject | marble | en_US |
dc.subject | slip safety | en_US |
dc.subject | slip angle | en_US |
dc.subject | slip resistance | en_US |
dc.subject | ramp test | en_US |
dc.subject | pendulum method | en_US |
dc.subject | surface processing | en_US |
dc.title | Slip Safety Analysis of Differently Surface Processed Dimension Marbles | en_US |
dc.type | article | en_US |
dc.relation.journal | JOURNAL OF TESTING AND EVALUATION | en_US |
dc.contributor.department | [Sariisik, A.] Afyon Kocatepe Univ, Fac Engn, Dept Min, TR-03200 Afyon, Turkey -- [Akdas, H.] ESOGU, Fac Engn, Dept Min, TR-26420 Meselik Yereskesi, Eskisehir, Turkey -- [Sariisik, G.] Afyon Kocatepe Univ, Vocat Sch Iscehisar, TR-03750 Iscehisar, Afyonkarahisar, Turkey -- [Coskun, G.] Cumhuriyet Univ, Vocat Sch Sivas, TR-58140 Sivas, Turkey | en_US |
dc.identifier.volume | 39 | en_US |
dc.identifier.issue | 5 | en_US |
dc.identifier.endpage | 917 | en_US |
dc.identifier.startpage | 908 | en_US |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |