Browsing Sivas Cumhuriyet Üniversitesi Teknoloji Fakültesi by Issue Date
Now showing items 1-20 of 100
-
Austempering Ce-La inoculated solution strengthened ferritic ductile cast irons
(REDAKCIA KOVOVE MATERIALYUL RACIANSKA 75, PO BOX 95, 830 08 BRATISLAVA 38, SLOVAKIA, 01 Februar)The influence of austempering conditions on the microstructure, hardness, tensile strength, and impact toughness of Ce-La inoculated solution-strengthened ferritic ductile irons was analyzed. The austempering was performed ... -
Structural analysis of Cu-based FeCr reinforced composites prepared by mechanical alloying
(WALTER DE GRUYTER GMBHGENTHINER STRASSE 13, D-10785 BERLIN, GERMANY, 01 July 20)Production and structural investigations of Cu-based FeCr reinforced composite were performed by using mechanical alloying, optical microscope, scanning electron microscope, X-ray diffraction and hardness test. The increment ... -
Investigation of Surface Properties and FeB-Fe2B Layer Formation in Pack Boronizing of Cementation Steel
(World Scientific Publishing Co. Pte. Ltd., 01 Septemb)In this study, cementation steel was boronized at 1050∘C for 6h, 8h, and 10h. Microstructural change on the surface of the samples after boronization was detected by optical microscope (OM), scanning electron microscope ... -
Mermer Plaka Sınıflandırma Sistem Tasarımı
(01.02.2023)Desen Derin Ogrenme Tabanli Mermer Seleksiyon Sistem tasarimi, transfer öğrenme süreçlerini kullanarak ülkemizde bulunan 650 çeşit mermer ailesinin her birinin kendi içinde örüntülerine göre otomatik sınıflandırabilecek ... -
Farklı Yüzey Geometrisine Sahip Dönen Ve Dönmeyen Silindirlerin Akıs Ve Isı Geçisine Etkilerinin Deneysel Ve Sayısal Olarak Incelenmesi
(01.05.2021)Projede farklı yüzey geometrisine sahip dönen ve dönmeyen silindirlerin akış ve ısı geçişine etkilerinin deneysel ve sayısal olarak incelenmesi hdeflenmektedir. Projenin deneysel kısmında üst akış bölgesinde bulunan farklı ... -
INVESTIGATION OF HEAT TRANSFER IN COMBINED JET FLOW CHANNELS WITH DIFFERENT FIN ANGLES AND USING DIAMOND-WATER NANOFLUID
(01.06.2022)With traditional heat transfer methods, more energy is consumed and sufficient and desired heat transfer performance cannot be achieved. However, with the development of technology, the heating problem arises in high-performance ... -
Investigating the best automatic programming method in predicting the aerodynamic characteristics of wind turbine blade
(Elsevier, 03.05.2023)Automatic programming (AP) is a subfield of artificial intelligence (AI) that can automatically generate computer programs and solve complex engineering problems. This paper presents the accuracy of four different AP methods ... -
EXPLORING THE IMPACT OF GEOMETRIC PARAMETERS ON HEAT TRANSFER AND FLUID FLOW CHARACTERISTICS IN CROSS-TRIANGULAR GROOVED CHANNELS: A COMPUTATIONAL STUDY
(03.06.2024)In this study, the impact of geometric parameters of rectangular baffles with varying location angles and heights is investigated on the heat transfer and fluid flow characteristics of cross-triangular grooved channels. ... -
Mechanical Performance and Weldability of HARDOX 450/AISI 430 Grade Joined by TIG Double Sided Arc Welding
(http://www.degruyter.com, 04 Novembe)AISI 430 and HARDOX 450 grades were combined using tungsten inert gas double-sided welding process. Microstructural changes were evaluated with scanning electron microscope, energy dispersive spectrometry, electron back ... -
Microstructure and Mechanical Characteristics of AISI 304 / DUROSTAT 500 Steel Double-Side TIG Welds
(http://www.degruyter.com, 05 August )In this study, AISI 304 stainless steel and DUROSTAT 500 steel are combined using TIG double-sided arc welding. Microstructural differences of welded joints were researched by using a scanning electron microscope (SEM), ... -
Metallurgical Properties of Borid Layers Formed in Pack Boronized Cementation Steel
(http://www.degruyter.com, 06 Septemb)In the present study, cementation steel was exposed to boronizing process at 950 °C for 6, 8, and 10 h. Microstructural changes on the surface of the samples after boron operation were inspected by optical microscope, ... -
Effect of Thermomechanical Process on Mechanical Properties of CuZn10 Alloy
(http://www.degruyter.com, 07 July 20)The effects of thermomechanical processing on the grain size, tensile strength, and strain rate of a CuZn10 alloy were investigated. Microstructures of thermomechanically treated samples were introduced using a scanning ... -
EVALUATION OF HEAT TRANSFER INCREASE ACCORDING TO THE DISTANCE OF THE FIN FROM THE IMPINGING JET INLET IN COMBINED JET FLOW CHANNELS USING TIO2-WATER NANOFLUID
(07.01.2023)Today, when the transition of world countries to green energy is discussed, the method of obtaining energy and reducing the amount of use in all kinds of sectors are among the most important and crucial issues. The increase ... -
Investigation of the Effect of Length Change of Fin Placed in Cross Flow-Impinging Jet Flow Channels with Al2O3 -Water Nanofluid on Flow Structure and Heat Transfer
(07.01.2023)With the impact of global climate change being felt in recent years, efforts to transition to a green economy have started to gain momentum all over the world, especially in European countries. In this context, it is aimed ... -
Microstructure and Mechanical Characteristics of AISI 304 / DUROSTAT 500 Steel Double-Side TIG Welds
(http://www.degruyter.com, 08 August )In this study, AISI 304 stainless steel and DUROSTAT 500 steel are combined using TIG double-sided arc welding. Microstructural differences of welded joints were researched by using a scanning electron microscope (SEM), ... -
Microstructure and Fatique Performance of Cu Based M7C3 Reinforced Composites
(http://www.degruyter.com, 09 March 2)Cu\Fe–Cr–C metal matrix composites (MMCs) were produced with a reinforcer addition of 6, 9, 12, 15, and 18 wt% Fe–Cr–C by powder metallurgy. The effects of sintering temperatures on Cu-based Fe–Cr–C-reinforced composites ... -
Support Vector Machine (SVM) Application for Uniaxial Compression Strength (UCS) Prediction: A Case Study for Maragheh Limestone
(09.02.2023)The geomechanical properties of rock materials, such as uniaxial compression strength (UCS), are the main requirements for geo-engineering design and construction. A proper understanding of UCS has a significant impression ... -
A comprehensive review of automatic programming methods
(09.07.2023)Automatic programming (AP) is one of the most attractive branches of artificial intelligence because it provides effective solutions to problems with limited knowledge in many different application areas. AP methods can ... -
Microstructure and wear analysis of CoWC alloy layers deposited by PTA process
(EDP SCIENCES S A17, AVE DU HOGGAR, PA COURTABOEUF, BP 112, F-91944 LES ULIS CEDEX A, FRANCE, 12 April 2)CoWC composite coatings were produced on AISI 430 steel by the plasma transfer arc cladding. Three different powder mixtures containing WC (90%, 85% and 80%) and Co (10%, 15% and 20%) were used. Phase composition, ... -
THE EFFECT OF FIN ANGLE ON INCREASING THE HEAT TRANSFER FROM ELECTRONIC COMPONENTS BY APPLYING AN IMPINGING JET-CROSS FLOW
(12.11.2021)With the advancement of technology, circuit elements in developing electronic devices heat up and their temperatures rise depending on the working load. Cross flow, which is one of the methods used to increase heat transfer ...
