Search
Now showing items 31-40 of 51
Microstructure and Mechanical Characteristics of AISI 304 / DUROSTAT 500 Steel Double-Side TIG Welds
(http://www.degruyter.com, 05 August )
In this study, AISI 304 stainless steel and DUROSTAT 500 steel are combined using TIG double-sided arc welding. Microstructural differences of welded joints were researched by using a scanning electron microscope (SEM), ...
Effect of FeTi-FeB Inoculation on Shape of Carbide Reinforcements in Hypoeutectic High Chromium White Cast Irons
(http://www.degruyter.com, 16 March 2)
FeTi-FeB was added to molten high chromium white cast iron in amounts of 0.5–2.5 wt% at 50 °C above the melting temperature. The samples were produced in four groups. The first group samples were investigated as cast, the ...
Effect of Ni on microstructure and wear behaviour of 13Cr-W-Mo-2C white cast iron
(CONSEJO SUPERIOR INVESTIGACIONES CIENTIFICAS-CSICEditorial CSIC, C/VITRUVIO 8, 28006 MADRID, SPAIN, 30 June 20)
The effect of Ni concentration on the microstructure and wear performance of 13Cr-(0.5-7.0) Ni-W-Mo-Mn-2C white cast iron subjected to homogenization heat treatment was examined. Concentration of Ni was altered in the range ...
Long term endurance analysis of the effects on ring wear and lubrication oil of biofuel used in a DI diesel engine
(2023)
In this study, the long-term endurance tests were carried out in an engine that was used 100% diesel and 90% diesel
210% bioethanol blend. The lubricating oil and ring wear were investigated in the direct injection diesel ...
Effect of piston geometry on combustion characteristics of CI engine used Sal seed oil
(2023)
The effect of piston bowl geometry on reducing soot emissions, improving combustion, and in-cylinder flow movements
in a direct injection diesel engine was investigated. Standard combustion chamber (SCC) and newly modified ...
An experimental investigation of new chamber geometry on the combustion characteristics, performance and emissions in a light-duty diesel engine
(ELSEVİER, 2023)
Piston bowl geometry directly affects many parameters such as combustion, flow, turbulence, and mixture
formation in-cylinder. This causes a change in engine performance, combustion characteristics and exhaust
emissions. ...
Structural analysis of Cu-based FeCr reinforced composites prepared by mechanical alloying Gefügeanalyse von Cu-basierten und FeCrverstärkten Verbundwerkstoffen hergestellt durch mechanisches Legieren
(De Gruyter, 2023)
Production and structural investigations of Cu-based FeCr reinforced composite were performed by using mechanical alloying, optical microscope, scanning electron microscope, X-ray diffraction and hardness test. The increment ...
Improvement of metallurgical properties of A356 aluminium alloy by AlCrFeSrTiBSi master alloy
(WALTER DE GRUYTER GMBHGENTHINER STRASSE 13, D-10785 BERLIN, GERMANY, 3 February)
A new AlCrFeSrTiBSi master alloy was manufactured by in situ synthesis in Al melt, and compared with
AlBSr master alloy. Microstructures of A356 alloy modified with AlCrFeSrTiBSi master alloy were investigated, and the ...
Joint performance of medium carbon steelaustenitic stainless steel double-sided TIG welds
(WALTER DE GRUYTER GMBHGENTHINER STRASSE 13, D-10785 BERLIN, GERMANY, 3 February)
AISI 1040 and AISI 304 steel plates of 10 mm were joined without pretreatment by double-sided TIG
arc welding (DSAW). Joints were manufactured by using welding currents of 420, 440, and 460 A. The microstructural variations ...
Joint performance of medium carbon steelaustenitic stainless steel double-sided TIG welds
(De Gruyter, 2023)
AISI 1040 and AISI 304 steel plates of 10 mm were joined without pretreatment by double-sided TIG arc welding (DSAW). Joints were manufactured by using welding currents of 420, 440, and 460 A. The microstructural variations ...