Search
Now showing items 1-10 of 20
Metallurgical and Mechanical Characteristics of Friction Welded Joint of 27 wt.%CrWCI/AISI 1040 Steel
(www.springer.com, 2021)
In this study, metallurgical properties of AISI 1040 steel and high-chromium white cast iron joined using
friction welding process was investigated experimentally. Scanning electron microscopy, optical microscopy, ...
Characterization of mechanically alloyed Fe based and MoNiAl+Al2O3 reinforced composites
(https://www.degruyter.com, 2021)
Fe-MoNiAl-Al2O3 powders were mechanically alloyed by a SPEX type attritor. The Fe based composite samples were reinforced with complex mechanically alloyed Fe-MoNiAl-Al2O3 particles in different ratios and Fe matrix ...
Friction welding of high Cr white cast iron to AISI 1030 steel with Ni interlayer
(https://www.degruyter.com, 2021)
In this study, the effect of friction time on microstructure and weldability of AISI 1030 steel with nickel interlayer and high chromium white cast iron welded by the friction welding method were investigated
experimentally. ...
Effect of rotary friction welding on mechanical properties of 6060 Al alloy
(https://revistademetalurgia.revistas.csic.es, 2021)
6xxx series of aluminum alloys are prone to cracking when fusion welded without a proper filler metal. Alternatively, these alloys can be welded by rotary friction welding, a solid-state welding process,
without using ...
Heat affected zone and weld metal analysis of HARDOX 450 and ferritic stainless steel double sided TIG-joints
(https://www.degruyter.com, 2021)
In this study, AISI 430 and HARDOX 450 grade steel are joined using a double-sided tungsten inert gas welding process. The microstructural properties of weld metal and HAZ were evaluated by optical microscopy, energy ...
Mechanical Performance and Weldability of HARDOX 450/AISI 430 Grade Joined by TIG Double Sided Arc Welding
(http://www.degruyter.com, 04 Novembe)
AISI 430 and HARDOX 450 grades were combined using tungsten inert gas double-sided welding process. Microstructural changes were evaluated with scanning electron microscope, energy dispersive spectrometry, electron back ...
Metallographic Study and Wear Behavior of Cu Based FeTi Reinforced Composites
(World Scientific Publishing Co. Pte. Ltd., 31 January)
Cu-based FeTi-reinforced metal matrix composites (MMCs) were produced with FeTi reinforcement additions of 6, 9, 12, 15 and 18wt.% by powder metallurgy. Microstructural characterization of Cu-based FeTi-reinforced composites ...
Effect of Austempering Treatment on Metallurgical Structure of Ce Inoculated X210Cr12 Cold Work Tool Steel
(http://www.degruyter.com, 21 Februar)
The effect of austempering treatment on metallurgical structure of X210Cr12 cold work tool steel inoculated with Ce was researched. Microstructural changes, elemental characterizations, and phase formations of the samples ...
Investigation of Surface Properties and FeB-Fe2B Layer Formation in Pack Boronizing of Cementation Steel
(World Scientific Publishing Co. Pte. Ltd., 01 Septemb)
In this study, cementation steel was boronized at 1050∘C for 6h, 8h, and 10h. Microstructural change on the surface of the samples after boronization was detected by optical microscope (OM), scanning electron microscope ...
Microstructure and Fatique Performance of Cu Based M7C3 Reinforced Composites
(http://www.degruyter.com, 09 March 2)
Cu\Fe–Cr–C metal matrix composites (MMCs) were produced with a reinforcer addition of 6, 9, 12, 15, and 18 wt% Fe–Cr–C by powder metallurgy. The effects of sintering temperatures on Cu-based Fe–Cr–C-reinforced composites ...