dc.contributor.author | Teker, Tanju | |
dc.contributor.author | Sarı, Murat | |
dc.date.accessioned | 2023-06-20T12:39:57Z | |
dc.date.available | 2023-06-20T12:39:57Z | |
dc.date.issued | 01 September 2022 | tr |
dc.identifier.citation | Tanju TEKER, Murat SARI, Investigation of Surface Properties and FeB-Fe2B Layer Formation in Pack Boronizing of Cementation Steel, Surface Review and Letters, Vol. 29, No. 9, September 2022, 2250122, https://doi.org/10.1142/S0218625X22501220 | tr |
dc.identifier.uri | https://hdl.handle.net/20.500.12418/13796 | |
dc.description.abstract | In this study, cementation steel was boronized at 1050∘C for 6h, 8h, and 10h. Microstructural change on the surface of the samples after boronization was detected by optical microscope (OM), scanning electron microscope (SEM), energy dispersive spectroscopy (EDS), X-Ray diffraction (XRD), and electron back scatter diffraction (EBSD) analyses. Also, surface roughness, microhardness, and layer thickness were measured. FeB, Fe2B phases, and saw tooth morphology expected in iron-based metals during boring process occurred in the entire process time. The average layer thickness of the boronized samples at 1050∘C for 10h was measured as 222μm and the surface roughness value was 3.40μm. The hardness of boride phases acquired on the samples varied between 1700 HV and 1730 HV. As a result, while the ratio of chromium carbide is the highest in the base metal, the boron level was the highest in the coating. Compounds 49wt.% Cr7C3 and 47wt.% B were identified as the most intensely concentrated. | tr |
dc.description.sponsorship | This study was supported by the Adiyaman University Scientiific Research Project Unit (grant number: MUFYL/2018-0002). | tr |
dc.language.iso | eng | tr |
dc.publisher | World Scientific Publishing Co. Pte. Ltd. | tr |
dc.relation.isversionof | https://doi.org/10.1142/S0218625X22501220 | tr |
dc.rights | info:eu-repo/semantics/closedAccess | tr |
dc.subject | Boronizing, cementation steel, surface roughness, layer thickness | tr |
dc.title | Investigation of Surface Properties and FeB-Fe2B Layer Formation in Pack Boronizing of Cementation Steel | tr |
dc.type | article | tr |
dc.relation.journal | Surface Review and Letters | tr |
dc.contributor.department | Teknoloji Fakültesi | tr |
dc.contributor.authorID | 0000-0001-7293-0723 | tr |
dc.identifier.volume | 29 | tr |
dc.identifier.issue | 9 | tr |
dc.identifier.startpage | 2250122 | tr |
dc.relation.publicationcategory | Uluslararası Hakemli Dergide Makale - Kurum Öğretim Elemanı | tr |