Microstructure and Fatique Performance of Cu Based M7C3 Reinforced Composites
Citation
Yilmaz, S. Osman, Teker, Tanju and Karabeyoğlu, S. Süreyya. "Microstructure and fatigue performance of Cu-based M7C3-reinforced composites" Materials Testing, vol. 64, no. 2, 2022, pp. 177-185. https://doi.org/10.1515/mt-2021-2022Abstract
Cu\Fe–Cr–C metal matrix composites (MMCs) were produced with a reinforcer addition of 6, 9, 12, 15, and 18 wt% Fe–Cr–C by powder metallurgy. The effects of sintering temperatures on Cu-based Fe–Cr–C-reinforced composites were studied using scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), X-ray diffraction (XRD), and hardness test. The electrical conductivity and tensile and fatigue strengths of samples were investigated by the conductivity meter and the tensile and fatigue testing machine. The interface microstructure between Fe–Cr–C and Cu particulates at 1000 °C showed a significant difference. The increase in tensile strength, hardness, and fatigue life gave a proportional change with an increase in Fe–Cr–C particulate vol%. The precipitated carbides and intermetallic compositions reduced electrical resistivity depending on the sintering temperature.