| dc.description.abstract | Piston bowl geometry directly affects many parameters such as combustion, flow, turbulence, and mixture
formation in-cylinder. This causes a change in engine performance, combustion characteristics and exhaust
emissions. In the present study, the effects of piston bowl geometry on mixture formation, combustion characteristics,
and emission characteristics of a direct injection compression ignition engine have been experimentally
tested. Novel bowl geometries namely New Combustion Chamber (NCC) were developed and made comparison
Standard Combustion Chamber (SCC). Air-cooled, four-stroke, single-cylinder and direct injection compression
ignition engine was used in the experiments. The diesel engine was operated under full load and different speed
conditions (1800, 1900, 2000, 2100 and 2200 rpm). Within the scope of the study, brake specific fuel consumption,
engine torque, exhaust emissions (CO2, CO, O2, HC, NO and soot) and combustion characteristics
(Instantaneous heat release rate, in-cylinder pressure change, rate of pressure rise and mass fraction burned)
were examined. The results showed that the eight pockets and sub-base radius in the NCC geometry significantly
improved the specified parameters. The NCC geometry according to the SCC, the specific fuel consumption
decreased by approximately 6.89% and engine torque increase 6.32% in the achieved maximum torque at 2000
rpm. Exhaust emissions are generally reduced thanks to the NCC bowl geometry. However, NO emissions
increased due to increased temperatures, improved combustion and mixture formation at all speeds. When the
combustion analyzes were examined, it was seen that the new type of bowl improved the combustion. The reason
was that the increase of the bowl in the surface area, and the increased turbulence with it provided easier
evaporation of the fuel droplets and better mixture formation with the air. The spread of combustio | tr |
