İmalat Mühendisliği Bölümü
Collections in this community
Recent Submissions
-
Effect of Ni on microstructure and wear behaviour of 13Cr-W-Mo-2C white cast iron
(CONSEJO SUPERIOR INVESTIGACIONES CIENTIFICAS-CSICEditorial CSIC, C/VITRUVIO 8, 28006 MADRID, SPAIN, 30 June 20)The effect of Ni concentration on the microstructure and wear performance of 13Cr-(0.5-7.0) Ni-W-Mo-Mn-2C white cast iron subjected to homogenization heat treatment was examined. Concentration of Ni was altered in the range ... -
Weldability and mechanical behavior of CMT welded AISI 430 and HARDOX 500 steels
(WALTER DE GRUYTER GMBHGENTHINER STRASSE 13, D-10785 BERLIN, GERMANY, 31 August )In this study, AISI 430 and HARDOX 500 steels were joined by cold metal transfer (CMT) welding method. The properties and microstructural changes of the welding and HAZ regions were investigated by OM and SEM analyses. ... -
Structural analysis of Cu-based FeCr reinforced composites prepared by mechanical alloying
(WALTER DE GRUYTER GMBHGENTHINER STRASSE 13, D-10785 BERLIN, GERMANY, 01 July 20)Production and structural investigations of Cu-based FeCr reinforced composite were performed by using mechanical alloying, optical microscope, scanning electron microscope, X-ray diffraction and hardness test. The increment ... -
Austempering Ce-La inoculated solution strengthened ferritic ductile cast irons
(REDAKCIA KOVOVE MATERIALYUL RACIANSKA 75, PO BOX 95, 830 08 BRATISLAVA 38, SLOVAKIA, 01 Februar)The influence of austempering conditions on the microstructure, hardness, tensile strength, and impact toughness of Ce-La inoculated solution-strengthened ferritic ductile irons was analyzed. The austempering was performed ... -
Microstructure and wear analysis of CoWC alloy layers deposited by PTA process
(EDP SCIENCES S A17, AVE DU HOGGAR, PA COURTABOEUF, BP 112, F-91944 LES ULIS CEDEX A, FRANCE, 12 April 2)CoWC composite coatings were produced on AISI 430 steel by the plasma transfer arc cladding. Three different powder mixtures containing WC (90%, 85% and 80%) and Co (10%, 15% and 20%) were used. Phase composition, ... -
Effect of alloying elements on mechanical behaviour of Cu-Zn-Sn bronzes
(WALTER DE GRUYTER GMBHGENTHINER STRASSE 13, D-10785 BERLIN, GERMANY, 8 March 20)The effect of Fe, P and Mn on microstructure and fatigue properties of CuZnSn bronzes investigated with optical microscopy and scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction, hardness, ... -
Long term endurance analysis of the effects on ring wear and lubrication oil of biofuel used in a DI diesel engine
(2023)In this study, the long-term endurance tests were carried out in an engine that was used 100% diesel and 90% diesel 210% bioethanol blend. The lubricating oil and ring wear were investigated in the direct injection diesel ... -
Analysis of an innovative combustion chamber with the wall guided fuel injection in a small diesel engine
(2023)This paper has included the effects of different bowl geometries which has the wall guided fuel injection. Bowl geometries, which affect in-cylinder air flows, have a great influence on the change of mixture formation. ... -
Effect of piston geometry on combustion characteristics of CI engine used Sal seed oil
(2023)The effect of piston bowl geometry on reducing soot emissions, improving combustion, and in-cylinder flow movements in a direct injection diesel engine was investigated. Standard combustion chamber (SCC) and newly modified ... -
An experimental investigation of new chamber geometry on the combustion characteristics, performance and emissions in a light-duty diesel engine
(ELSEVİER, 2023)Piston bowl geometry directly affects many parameters such as combustion, flow, turbulence, and mixture formation in-cylinder. This causes a change in engine performance, combustion characteristics and exhaust emissions. ... -
Joint performance of medium carbon steelaustenitic stainless steel double-sided TIG welds
(WALTER DE GRUYTER GMBHGENTHINER STRASSE 13, D-10785 BERLIN, GERMANY, 3 February)AISI 1040 and AISI 304 steel plates of 10 mm were joined without pretreatment by double-sided TIG arc welding (DSAW). Joints were manufactured by using welding currents of 420, 440, and 460 A. The microstructural variations ... -
Improvement of metallurgical properties of A356 aluminium alloy by AlCrFeSrTiBSi master alloy
(WALTER DE GRUYTER GMBHGENTHINER STRASSE 13, D-10785 BERLIN, GERMANY, 3 February)A new AlCrFeSrTiBSi master alloy was manufactured by in situ synthesis in Al melt, and compared with AlBSr master alloy. Microstructures of A356 alloy modified with AlCrFeSrTiBSi master alloy were investigated, and the ... -
Techno-economic analysis of ground source heat pump powered by hybrid photovoltaic–wind–diesel systems in a temperate climate region
(Springer Nature, Ağustos 20)As in many European countries, Turkey’s foreign energy dependency is quite high. Reducing foreign dependency on energy on a national basis is possible by developing efficient systems and increasing the use of renewable ... -
Analysis of reusability of ThO2 and spent UO2 fuels enriched with ads in a CANDU reactor
(Aralık 202)The study presents the analysis of the reusability of ThO2 and spent UO2 fuels enriched in two different ADS reactors fuelled with Minor Actinide. The spent UO2 fuels are taken out from pressurized water reactor and CANDU ... -
Analysis of thorium and transuranium utilization in a small modular reactor
(Eylül 2022)This study presents neutronic analyses of a small modular reactor utilizing transuranium and thorium. Two different fuel cases are considered in the analyses as the transuranium extracted from PWR-MOX spent fuel (a form ... -
Microstructure and Mechanical Characteristics of AISI 304 / DUROSTAT 500 Steel Double-Side TIG Welds
(http://www.degruyter.com, 05 August )In this study, AISI 304 stainless steel and DUROSTAT 500 steel are combined using TIG double-sided arc welding. Microstructural differences of welded joints were researched by using a scanning electron microscope (SEM), ... -
Effect of Austempering Treatment on Metallurgical Structure of Ce Inoculated X210Cr12 Cold Work Tool Steel
(http://www.degruyter.com, 21 Februar)The effect of austempering treatment on metallurgical structure of X210Cr12 cold work tool steel inoculated with Ce was researched. Microstructural changes, elemental characterizations, and phase formations of the samples ... -
Metallographic Study and Wear Behavior of Cu Based FeTi Reinforced Composites
(World Scientific Publishing Co. Pte. Ltd., 31 January)Cu-based FeTi-reinforced metal matrix composites (MMCs) were produced with FeTi reinforcement additions of 6, 9, 12, 15 and 18wt.% by powder metallurgy. Microstructural characterization of Cu-based FeTi-reinforced composites ... -
Microstructure and Fatique Performance of Cu Based M7C3 Reinforced Composites
(http://www.degruyter.com, 09 March 2)Cu\Fe–Cr–C metal matrix composites (MMCs) were produced with a reinforcer addition of 6, 9, 12, 15, and 18 wt% Fe–Cr–C by powder metallurgy. The effects of sintering temperatures on Cu-based Fe–Cr–C-reinforced composites ... -
Effect of FeTi-FeB Inoculation on Shape of Carbide Reinforcements in Hypoeutectic High Chromium White Cast Irons
(http://www.degruyter.com, 16 March 2)FeTi-FeB was added to molten high chromium white cast iron in amounts of 0.5–2.5 wt% at 50 °C above the melting temperature. The samples were produced in four groups. The first group samples were investigated as cast, the ...