Browsing İmalat Mühendisliği Bölümü Makale Koleksiyonu by Title
Now showing items 42-53 of 53
-
Microstructure and Mechanical Characteristics of AISI 304 / DUROSTAT 500 Steel Double-Side TIG Welds
(http://www.degruyter.com, 05 August )In this study, AISI 304 stainless steel and DUROSTAT 500 steel are combined using TIG double-sided arc welding. Microstructural differences of welded joints were researched by using a scanning electron microscope (SEM), ... -
Microstructure and wear analysis of CoWC alloy layers deposited by PTA process
(EDP SCIENCES S A17, AVE DU HOGGAR, PA COURTABOEUF, BP 112, F-91944 LES ULIS CEDEX A, FRANCE, 12 April 2)CoWC composite coatings were produced on AISI 430 steel by the plasma transfer arc cladding. Three different powder mixtures containing WC (90%, 85% and 80%) and Co (10%, 15% and 20%) were used. Phase composition, ... -
Nanoakışkan Kullanılan Birleşik Jet Akışlı ve Kanatçıklı Kanallarda Isı Transferi ve Performans Değerlendirme Sayısının İncelenmesi
(2022)Bu çalışmada, birleşik jet akışlı kanallarda bulunan sabit ısı akılı küp ve dairesel oyuklu desenlerden olan ısı transferi su ve %0,02 hacimsel konsantrasyonlu GO (Grafen Oksit)-Su nanoakışkanı kullanılarak sayısal olarak ... -
Numerical Investigation of Corrugated Channel with Backward-Facing Step in Terms of Fluid Flow and Heat Transfer
(2022)In this study, the turbulent fluid flow and heat transfer through a backward-facing step connected by various triangles to a corrugated wall were numerically investigated. The governing equation was solved with Ansys Fluent, ... -
Numerical investigation of CPU cooling with micro-pin–fin heat sink in different shapes
(2022)The fact that today's computers transmit too much information at effective speeds causes high heat concentrations. These heat concentrations increase the temperature of the computer processor and cause it to deteriorate ... -
Numerical investigation of different combustion chamber on flow, combustion characteristics and exhaust emissions
(2023)This study includes numerical analysis of diesel engines with different bowl geometry. Numerical analyzes of the diesel engine with asymmetrical bowl geometry were performed in Ansys Forte software. In the study, four-stroke, ... -
Research of cooling performance in combined jet flow channels using different nanofluids
(15.01.2023)In this work, heat transfer from the cube and circular hollow-shaped copper plate surfaces with a constant heat flux of 1000 W/m2 was numerically investigated by using a combination of the cross-flow-impinging jet. Numerical ... -
Structural analysis of Cu-based FeCr reinforced composites prepared by mechanical alloying
(WALTER DE GRUYTER GMBHGENTHINER STRASSE 13, D-10785 BERLIN, GERMANY, 01 July 20)Production and structural investigations of Cu-based FeCr reinforced composite were performed by using mechanical alloying, optical microscope, scanning electron microscope, X-ray diffraction and hardness test. The increment ... -
Techno-economic analysis of ground source heat pump powered by hybrid photovoltaic–wind–diesel systems in a temperate climate region
(Springer Nature, Ağustos 20)As in many European countries, Turkey’s foreign energy dependency is quite high. Reducing foreign dependency on energy on a national basis is possible by developing efficient systems and increasing the use of renewable ... -
THE EFFECT OF FIN ANGLE ON INCREASING THE HEAT TRANSFER FROM ELECTRONIC COMPONENTS BY APPLYING AN IMPINGING JET-CROSS FLOW
(12.11.2021)With the advancement of technology, circuit elements in developing electronic devices heat up and their temperatures rise depending on the working load. Cross flow, which is one of the methods used to increase heat transfer ... -
The effect of outlet location on heat transfer performance in micro pin-fin cooling used for a CPU
(2021)In this study, the simulation of the coolant flow using micro-pin fins in the CPU heat sink was numerically presented with ANSYS-Fluent, a Computational Fluid Dynamics (CFD) program. Four different inlet–outlet configurations ... -
Weldability and mechanical behavior of CMT welded AISI 430 and HARDOX 500 steels
(WALTER DE GRUYTER GMBHGENTHINER STRASSE 13, D-10785 BERLIN, GERMANY, 31 August )In this study, AISI 430 and HARDOX 500 steels were joined by cold metal transfer (CMT) welding method. The properties and microstructural changes of the welding and HAZ regions were investigated by OM and SEM analyses. ...