Browsing İmalat Mühendisliği Bölümü Makale Koleksiyonu by Issue Date
Now showing items 1-20 of 53
-
Austempering Ce-La inoculated solution strengthened ferritic ductile cast irons
(REDAKCIA KOVOVE MATERIALYUL RACIANSKA 75, PO BOX 95, 830 08 BRATISLAVA 38, SLOVAKIA, 01 Februar)The influence of austempering conditions on the microstructure, hardness, tensile strength, and impact toughness of Ce-La inoculated solution-strengthened ferritic ductile irons was analyzed. The austempering was performed ... -
Structural analysis of Cu-based FeCr reinforced composites prepared by mechanical alloying
(WALTER DE GRUYTER GMBHGENTHINER STRASSE 13, D-10785 BERLIN, GERMANY, 01 July 20)Production and structural investigations of Cu-based FeCr reinforced composite were performed by using mechanical alloying, optical microscope, scanning electron microscope, X-ray diffraction and hardness test. The increment ... -
Investigation of Surface Properties and FeB-Fe2B Layer Formation in Pack Boronizing of Cementation Steel
(World Scientific Publishing Co. Pte. Ltd., 01 Septemb)In this study, cementation steel was boronized at 1050∘C for 6h, 8h, and 10h. Microstructural change on the surface of the samples after boronization was detected by optical microscope (OM), scanning electron microscope ... -
Farklı Yüzey Geometrisine Sahip Dönen Ve Dönmeyen Silindirlerin Akıs Ve Isı Geçisine Etkilerinin Deneysel Ve Sayısal Olarak Incelenmesi
(01.05.2021)Projede farklı yüzey geometrisine sahip dönen ve dönmeyen silindirlerin akış ve ısı geçişine etkilerinin deneysel ve sayısal olarak incelenmesi hdeflenmektedir. Projenin deneysel kısmında üst akış bölgesinde bulunan farklı ... -
EXPLORING THE IMPACT OF GEOMETRIC PARAMETERS ON HEAT TRANSFER AND FLUID FLOW CHARACTERISTICS IN CROSS-TRIANGULAR GROOVED CHANNELS: A COMPUTATIONAL STUDY
(03.06.2024)In this study, the impact of geometric parameters of rectangular baffles with varying location angles and heights is investigated on the heat transfer and fluid flow characteristics of cross-triangular grooved channels. ... -
Mechanical Performance and Weldability of HARDOX 450/AISI 430 Grade Joined by TIG Double Sided Arc Welding
(http://www.degruyter.com, 04 Novembe)AISI 430 and HARDOX 450 grades were combined using tungsten inert gas double-sided welding process. Microstructural changes were evaluated with scanning electron microscope, energy dispersive spectrometry, electron back ... -
Microstructure and Mechanical Characteristics of AISI 304 / DUROSTAT 500 Steel Double-Side TIG Welds
(http://www.degruyter.com, 05 August )In this study, AISI 304 stainless steel and DUROSTAT 500 steel are combined using TIG double-sided arc welding. Microstructural differences of welded joints were researched by using a scanning electron microscope (SEM), ... -
Metallurgical Properties of Borid Layers Formed in Pack Boronized Cementation Steel
(http://www.degruyter.com, 06 Septemb)In the present study, cementation steel was exposed to boronizing process at 950 °C for 6, 8, and 10 h. Microstructural changes on the surface of the samples after boron operation were inspected by optical microscope, ... -
Effect of Thermomechanical Process on Mechanical Properties of CuZn10 Alloy
(http://www.degruyter.com, 07 July 20)The effects of thermomechanical processing on the grain size, tensile strength, and strain rate of a CuZn10 alloy were investigated. Microstructures of thermomechanically treated samples were introduced using a scanning ... -
Microstructure and Mechanical Characteristics of AISI 304 / DUROSTAT 500 Steel Double-Side TIG Welds
(http://www.degruyter.com, 08 August )In this study, AISI 304 stainless steel and DUROSTAT 500 steel are combined using TIG double-sided arc welding. Microstructural differences of welded joints were researched by using a scanning electron microscope (SEM), ... -
Microstructure and Fatique Performance of Cu Based M7C3 Reinforced Composites
(http://www.degruyter.com, 09 March 2)Cu\Fe–Cr–C metal matrix composites (MMCs) were produced with a reinforcer addition of 6, 9, 12, 15, and 18 wt% Fe–Cr–C by powder metallurgy. The effects of sintering temperatures on Cu-based Fe–Cr–C-reinforced composites ... -
Microstructure and wear analysis of CoWC alloy layers deposited by PTA process
(EDP SCIENCES S A17, AVE DU HOGGAR, PA COURTABOEUF, BP 112, F-91944 LES ULIS CEDEX A, FRANCE, 12 April 2)CoWC composite coatings were produced on AISI 430 steel by the plasma transfer arc cladding. Three different powder mixtures containing WC (90%, 85% and 80%) and Co (10%, 15% and 20%) were used. Phase composition, ... -
THE EFFECT OF FIN ANGLE ON INCREASING THE HEAT TRANSFER FROM ELECTRONIC COMPONENTS BY APPLYING AN IMPINGING JET-CROSS FLOW
(12.11.2021)With the advancement of technology, circuit elements in developing electronic devices heat up and their temperatures rise depending on the working load. Cross flow, which is one of the methods used to increase heat transfer ... -
Research of cooling performance in combined jet flow channels using different nanofluids
(15.01.2023)In this work, heat transfer from the cube and circular hollow-shaped copper plate surfaces with a constant heat flux of 1000 W/m2 was numerically investigated by using a combination of the cross-flow-impinging jet. Numerical ... -
Investigation of heat transfer and flow properties in separated flow and reattachment regions for liquid sodium flow at fast reactors
(15.04.2021)In many engineering applications, such as heating and cooling systems, flow around an automobile or building, separation and reattachment regions are formed. These regions are very important for controlling the amount of ... -
Investigation of Graphene Oxide-Distilled Water Nanofluids with Consideration of Heat Transfer and Flow Structure for Backward-Facing Step Flow
(15.04.2021)The backward-facing step flow is seen in applications in our daily life: the high attack angle at airfoil, the separation flow behind a vehicle, the flow in a gas turbine, and the flow around a boat or building. In view ... -
Effect of FeTi-FeB Inoculation on Shape of Carbide Reinforcements in Hypoeutectic High Chromium White Cast Irons
(http://www.degruyter.com, 16 March 2)FeTi-FeB was added to molten high chromium white cast iron in amounts of 0.5–2.5 wt% at 50 °C above the melting temperature. The samples were produced in four groups. The first group samples were investigated as cast, the ... -
AISI 430 çelik çiftinin manuel (GMAW) ve sinerjik kontrollü (GMAW-P) kaynağında ısı girdisinin mikroyapı üzerindeki etkisi
(2010)Bu çalısmada, AISI 430 ferritik paslanmaz çelik çiftinin sinerjik kontrollü darbeli (GMAW-P) ve manuel gaz metal ark (GMAW) kaynağı incelenmistir. Kaynaklar 3.2 m/dak. tel ilerleme hızı, 22.5 V kaynak voltajı, argon + %2 ... -
Experimental and numerical evaluation of combustion analysis of a DI diesel engine
(Elsevier, 2021)In this study investigated both experimentally and numerically in detail the combustion characteristics of a diesel engine operating with biodiesel fuel produced from fig seed oil at full load and different speeds. The ... -
Fatigue Life and Stress Analysis of the Crankshaft of a Single Cylinder Diesel Engine under Variable Forces and Speeds
(De Gruyter, 2021)In this paper, a single cylinder crankshaft manufactured with C45 steel was used to investigate variation in stress, deformation, and fatigue life and safety factor at critical locations of the crankshaft. For this ...
