Yayın tarihi için İmalat Mühendisliği Bölümü Makale Koleksiyonu listeleme
Toplam kayıt 32, listelenen: 1-20
-
Investigation of Surface Properties and FeB-Fe2B Layer Formation in Pack Boronizing of Cementation Steel
(World Scientific Publishing Co. Pte. Ltd., 01 Septemb)In this study, cementation steel was boronized at 1050∘C for 6h, 8h, and 10h. Microstructural change on the surface of the samples after boronization was detected by optical microscope (OM), scanning electron microscope ... -
Farklı Yüzey Geometrisine Sahip Dönen Ve Dönmeyen Silindirlerin Akıs Ve Isı Geçisine Etkilerinin Deneysel Ve Sayısal Olarak Incelenmesi
(01.05.2021)Projede farklı yüzey geometrisine sahip dönen ve dönmeyen silindirlerin akış ve ısı geçişine etkilerinin deneysel ve sayısal olarak incelenmesi hdeflenmektedir. Projenin deneysel kısmında üst akış bölgesinde bulunan farklı ... -
Mechanical Performance and Weldability of HARDOX 450/AISI 430 Grade Joined by TIG Double Sided Arc Welding
(http://www.degruyter.com, 04 Novembe)AISI 430 and HARDOX 450 grades were combined using tungsten inert gas double-sided welding process. Microstructural changes were evaluated with scanning electron microscope, energy dispersive spectrometry, electron back ... -
Microstructure and Mechanical Characteristics of AISI 304 / DUROSTAT 500 Steel Double-Side TIG Welds
(http://www.degruyter.com, 05 August )In this study, AISI 304 stainless steel and DUROSTAT 500 steel are combined using TIG double-sided arc welding. Microstructural differences of welded joints were researched by using a scanning electron microscope (SEM), ... -
Metallurgical Properties of Borid Layers Formed in Pack Boronized Cementation Steel
(http://www.degruyter.com, 06 Septemb)In the present study, cementation steel was exposed to boronizing process at 950 °C for 6, 8, and 10 h. Microstructural changes on the surface of the samples after boron operation were inspected by optical microscope, ... -
Effect of Thermomechanical Process on Mechanical Properties of CuZn10 Alloy
(http://www.degruyter.com, 07 July 20)The effects of thermomechanical processing on the grain size, tensile strength, and strain rate of a CuZn10 alloy were investigated. Microstructures of thermomechanically treated samples were introduced using a scanning ... -
Microstructure and Mechanical Characteristics of AISI 304 / DUROSTAT 500 Steel Double-Side TIG Welds
(http://www.degruyter.com, 08 August )In this study, AISI 304 stainless steel and DUROSTAT 500 steel are combined using TIG double-sided arc welding. Microstructural differences of welded joints were researched by using a scanning electron microscope (SEM), ... -
Microstructure and Fatique Performance of Cu Based M7C3 Reinforced Composites
(http://www.degruyter.com, 09 March 2)Cu\Fe–Cr–C metal matrix composites (MMCs) were produced with a reinforcer addition of 6, 9, 12, 15, and 18 wt% Fe–Cr–C by powder metallurgy. The effects of sintering temperatures on Cu-based Fe–Cr–C-reinforced composites ... -
Investigation of heat transfer and flow properties in separated flow and reattachment regions for liquid sodium flow at fast reactors
(15.04.2021)In many engineering applications, such as heating and cooling systems, flow around an automobile or building, separation and reattachment regions are formed. These regions are very important for controlling the amount of ... -
Investigation of Graphene Oxide-Distilled Water Nanofluids with Consideration of Heat Transfer and Flow Structure for Backward-Facing Step Flow
(15.04.2021)The backward-facing step flow is seen in applications in our daily life: the high attack angle at airfoil, the separation flow behind a vehicle, the flow in a gas turbine, and the flow around a boat or building. In view ... -
Effect of FeTi-FeB Inoculation on Shape of Carbide Reinforcements in Hypoeutectic High Chromium White Cast Irons
(http://www.degruyter.com, 16 March 2)FeTi-FeB was added to molten high chromium white cast iron in amounts of 0.5–2.5 wt% at 50 °C above the melting temperature. The samples were produced in four groups. The first group samples were investigated as cast, the ... -
AISI 430 çelik çiftinin manuel (GMAW) ve sinerjik kontrollü (GMAW-P) kaynağında ısı girdisinin mikroyapı üzerindeki etkisi
(2010)Bu çalısmada, AISI 430 ferritik paslanmaz çelik çiftinin sinerjik kontrollü darbeli (GMAW-P) ve manuel gaz metal ark (GMAW) kaynağı incelenmistir. Kaynaklar 3.2 m/dak. tel ilerleme hızı, 22.5 V kaynak voltajı, argon + %2 ... -
Experimental and numerical evaluation of combustion analysis of a DI diesel engine
(Elsevier, 2021)In this study investigated both experimentally and numerically in detail the combustion characteristics of a diesel engine operating with biodiesel fuel produced from fig seed oil at full load and different speeds. The ... -
Fatigue Life and Stress Analysis of the Crankshaft of a Single Cylinder Diesel Engine under Variable Forces and Speeds
(De Gruyter, 2021)In this paper, a single cylinder crankshaft manufactured with C45 steel was used to investigate variation in stress, deformation, and fatigue life and safety factor at critical locations of the crankshaft. For this ... -
A Numerical Investigation of Heat Transfer from Heated Surfaces of Different Shapes
(2021)—The object of this study was cooling of inverted and plain triangular profile copper surfaces at a constant heat flux of 1000 W/m2. The cooling of these triangular profile surfaces placed at the bottom of a rectangular ... -
The effect of outlet location on heat transfer performance in micro pin-fin cooling used for a CPU
(2021)In this study, the simulation of the coolant flow using micro-pin fins in the CPU heat sink was numerically presented with ANSYS-Fluent, a Computational Fluid Dynamics (CFD) program. Four different inlet–outlet configurations ... -
Metallurgical and Mechanical Characteristics of Friction Welded Joint of 27 wt.%CrWCI/AISI 1040 Steel
(www.springer.com, 2021)In this study, metallurgical properties of AISI 1040 steel and high-chromium white cast iron joined using friction welding process was investigated experimentally. Scanning electron microscopy, optical microscopy, ... -
Characterization of mechanically alloyed Fe based and MoNiAl+Al2O3 reinforced composites
(https://www.degruyter.com, 2021)Fe-MoNiAl-Al2O3 powders were mechanically alloyed by a SPEX type attritor. The Fe based composite samples were reinforced with complex mechanically alloyed Fe-MoNiAl-Al2O3 particles in different ratios and Fe matrix ... -
Friction welding of high Cr white cast iron to AISI 1030 steel with Ni interlayer
(https://www.degruyter.com, 2021)In this study, the effect of friction time on microstructure and weldability of AISI 1030 steel with nickel interlayer and high chromium white cast iron welded by the friction welding method were investigated experimentally. ... -
Effect of rotary friction welding on mechanical properties of 6060 Al alloy
(https://revistademetalurgia.revistas.csic.es, 2021)6xxx series of aluminum alloys are prone to cracking when fusion welded without a proper filler metal. Alternatively, these alloys can be welded by rotary friction welding, a solid-state welding process, without using ...
