Güncel Gönderiler: Metalurji ve Malzeme Mühendisliği Bölümü
Toplam kayıt 38, listelenen: 21-38
-
Effect of Chemical Composition of Boriding Agent on the Optimization of Surface Hardness and Layer Thickness on AISI 8620 Steel by Solid and Liquid Boriding Processes
(08.10.2022)Surfaces of cam shafts made of AISI 8620 steels were hardened by boriding processes in both solid and liquid mediums. Various chemical agents were used to achieve boride layers on the surfaces of the cam shafts in these ... -
Improving the Electrochemical Energy Storage Capacity of the Renewable Carbon Derived from Industrial Tea Waste
(29.06.2022)Energy storage is gaining a vital role since the usage of portable electric/electronic devices and vehicles have been growing. Capacitors, called as electrochemical double layer capacitors or supercapacitors, find ... -
Effects of pH and Current Density on Microstructure and Hardness of the Cobalt-Tungsten Coating
(Dergipark, 14.04.2022)Effects of pH and Current Density on Microstructure and Hardness of the Cobalt-Tungsten Coating -
ZnO/Al2O3 layered structures deposited by RF magnetron sputtering on glass: growth characteristics, optical properties, and microstructural analysis
(Springer, 2021)In this study, Al2O3 thin films of different thicknesses (50 nm, 100 nm, 150 nm, 200 nm, and 250 nm) were, first, grown using RF magnetron sputtering technique on glass substrate at 30 °C temperature, with 120 W power ... -
Synthesis and characterization of chitosan–vermiculite composite beads for removal of uranyl ions: isotherm, kinetics and thermodynamics studies
(Springer, 2021)In this study, a new material containing Chitosan (Ch)–Vermiculite (V) composite beads was synthesized with epichlorohydrin cross-linking agent and used to remove uranyl ions from the aqueous solution. The prepared new ... -
An investigation of corrosive effects on zirconia with different crystal structures
(Wiley, 2021)This study aimed to compare the time-related corrosive resistance in different corrosive solution environments after sintering of zirconia with different crystal structures. The zirconia samples were produced in pellet ... -
Gallium oxide films deposition by RF magnetron sputtering; a detailed analysis on the effects of deposition pressure and sputtering power and annealing
(Elsevier, 2021)In this study, gallium oxide (Ga2O3) thin films were deposited on sapphire and n-Si substrates using Ga2O3 target by radio frequency magnetron sputtering (RFMS) at substrate temperature of 300 °C at variable RF power and ... -
Investigation of nitrogen doped ZnO thin films: Effects on their structural and optical properties
(Elsevier, (2021))Un-doped and nitrogen-doped ZnO thin films were grown by using radio frequency (RF) magnetron sputtering method changing the nitrogen flow rate between 0% ����� 12.5% and the thickness dependence of films was determined. ... -
Novel natural spider silk embedded electrospun nanofiber mats for wound healing
(Elsevier, 2021)In recent years, electrospun nanofiber mats based on biopolymers have been extensively investigated for tissue and biomedical engineering, mainly because of remarkable morphological similarity with the natural ... -
A comparative study of hardness/scratch/wear properties of TiCN and TiAlN coatings on DIN 1.2842 steel by CA-PVD method
(Springer, 2021)In the present study, TiCN and TiAlN were deposited on DIN 1.2842 (AISI O2) steel, and their mechanical properties was compared by investigating coating thickness, adhesion strength, microhardness, and elastic modulus. To ... -
Evaluation of the microhardness of different resin-based dental restorative materials treated with gastric acid: Scanning electron microscopy–energy dispersive X-ray spectroscopy analysis
(Wiley, 2021)The aim of this study is to evaluate the microhardness, relative surface roughness, and elemental changes of resin-based dental restorative materials (RDRMs) after gastric acid treatment. Five different RDRMs (Group 1 ... -
Optimisation of recycled moulding sand composition using the mixture design method
(Taylor and Francis, 25.05.2021)In the cast iron industry, mould sand quality and the most efficient recovery of used sand into the system are critical. For this purpose, the optimum values of the factors (humidity, active bentonite and coal dust) affecting ... -
A Novel and Eco‑friendly Approach for the Simultaneous Recovery of Copper and Diamond from Waste Cutting Segments via Electrodissolution/Deposition
(2021)A new approach is brought to diamond recovery from waste cutting segments. Unlike the commonly used hydrometallurgical processes, this approach offers the simultaneous recovery of copper with diamond. Besides, instead of ... -
ZnO/Al2O3 layered structures deposited by RF magnetron sputtering on glass: growth characteristics, optical properties, and microstructural analysis
(2021)In this study, Al2O3 thin films of different thicknesses (50 nm, 100 nm, 150 nm, 200 nm, and 250 nm) were, first, grown using RF magnetron sputtering technique on glass substrate at 30 °C temperature, with 120Wpower value. ... -
A comparative study of hardness/scratch/wear properties of TiCN and TiAlN coatings on DIN 1.2842 steel by CA-PVD method
(2021)In the present study, TiCN and TiAlN were deposited on DIN 1.2842 (AISI O2) steel, and their mechanical properties was compared by investigating coating thickness, adhesion strength, microhardness, and elastic modulus. To ... -
Templated grain growth of Bi(Zn0.5Zr0.5)O3 modified BiScO3−PbTiO3 piezoelectric ceramics for high temperature applications
(Taylor & Francis, 2021)2.5Bi(Zn0.5Zr0.5)O3−37.5BiScO3−60PbTiO3 (BZZ-BS-PT) ceramics were successfully textured in the [001] by templated grain growth (TGG) process using 5 vol% <001>-oriented BaTiO3 (BT) plate-like templates. The templates were ... -
The cathodic electrolytic plasma hardening of steel and cast iron based automotive camshafts
(Polish Academy of Sciences, 2017)Cathodic electrolytic plasma hardening is a novel thermochemical surface modification and hardening process, used to increase wear resistance and surface hardness of metallic components in a local area of interest. The ... -
Characterization of diamond impregnated B4C/Fe-Co MMC
(European International Powder Metallurgy Congress and Exhibition, Euro PM 2011, 2011)In this study, impregnated diamond cutting tools (Fe-Co matrix composite sockets) are processed by powder metallurgy method using hot pressing technique. The effects of Fe and B4C additions on the characteristic of diamond ...