Risk-targeted design of seismically isolated buildings
| dc.authorid | 0000-0003-1246-9423 | tr |
| dc.contributor.author | Güneş, Necmettin | |
| dc.date.accessioned | 2023-06-19T10:27:44Z | |
| dc.date.available | 2023-06-19T10:27:44Z | |
| dc.date.issued | Nisan 2022 | tr |
| dc.department | Mimarlık Güzel Sanatlar ve Tasarım Fakültesi | tr |
| dc.description.abstract | Seismic isolation has been used to improve the seismic performance of buildings for the last decades. However, it has been shown that the code-based displacement capacity of isolation members does not provide adequate collapse probabilities for different Risk Categories of ASCE 7–16. Seismic design codes stipulate to determine maximum isolator displacement at the Risk-Targeted Maximum Considered Earthquake (MCER) level. Although the code-based isolator displacement capacity is checked with the mean displacement of the MCER level nonlinear time history analysis results, extreme event effects and incorporating uncertainties into fragility curves create additional displacement demands. Therefore, there is a need to amplify the code-based displacement capacity of isolators to obtain sufficient collapse performance. A previous study, assumed elastic behavior and rigid mass model for the superstructure, proposes an iterative probabilistic approach. In the present study, seven different seismically isolated buildings are modeled, and the nonlinear behavior of isolators and superstructures is considered in the incremental dynamic analyses achieved for all models to obtain fragility curves. Although the seismic isolation considerably decreases the spectral accelerations of the superstructure, it is shown that the R-μ-T relations for diaphragm level accelerations, transferred accelerations from base to superstructure, become more sensitive to nonlinear behavior at the superstructure mode periods. The fragility curves of five case study buildings are obtained using the FEMA P695 procedure, and it is figured out that the collapse probability of isolation units is highly correlated with the required isolator displacement to code-based maximum isolator displacement (D/DM) ratio. Then, two simple equations with high correlation coefficients are acquired to estimate the required displacement capacity for prescribed risk-target levels. Further, the obtained equations are verified for two different isolated building models, and their results are compared with the Incremental Dynamic Analysis (IDA) results. The verification results show that the given equations can be used in the preliminary design phase of seismically isolated mid-rise reinforced concrete buildings. | tr |
| dc.identifier.doi | 10.1016/j.jobe.2021.103665 | en_US |
| dc.identifier.scopus | 2-s2.0-85120495731 | en_US |
| dc.identifier.scopusquality | N/A | |
| dc.identifier.uri | https://hdl.handle.net/20.500.12418/13723 | |
| dc.identifier.wos | WOS:000776148200002 | en_US |
| dc.identifier.wosquality | Q1 | |
| dc.indekslendigikaynak | Web of Science | en_US |
| dc.indekslendigikaynak | Scopus | en_US |
| dc.language.iso | en | en_US |
| dc.relation.publicationcategory | Uluslararası Hakemli Dergide Makale - Kurum Öğretim Elemanı | tr |
| dc.rights | info:eu-repo/semantics/closedAccess | tr |
| dc.subject | Seismic isolation,Risk-targeted design, Incremental dynamic analysis, Collapse probability, ASCE 7–16 | tr |
| dc.title | Risk-targeted design of seismically isolated buildings | en_US |
| dc.type | Article | en_US |
