Investigation of Mechanical and Structural Properties of Blend Lignin-PMMA

Basit Öğe Kaydı
dc.authoridSimsek, Selcuk -- 0000-0001-5755-0335en_US
dc.contributor.authorSoygun, Koray
dc.contributor.authorSimsek, Selcuk
dc.contributor.authorYilmaz, Ersen
dc.contributor.authorBolayir, Giray
dc.date.accessioned2019-07-27T12:10:23Z
dc.date.accessioned2019-07-28T10:00:47Z
dc.date.available2019-07-27T12:10:23Z
dc.date.available2019-07-28T10:00:47Z
dc.date.issued2013
dc.department[Soygun, Koray -- Bolayir, Giray] Cumhuriyet Univ, Fac Dent, Dept Prosthodont, TR-58140 Sivas, Turkey -- [Simsek, Selcuk -- Yilmaz, Ersen] Cumhuriyet Univ, Dept Chem, TR-58140 Sivas, Turkeyen_US
dc.description.abstractThis in vitro study investigated the mechanical and structural characteristics of lignin-added PMMA resin composites at concentrations of 1, 3, and 5% by weight. Four sample groups were formed. For the transverse strength test, the specimens were prepared in accordance with ANSI/ADA specification number 12, and for the impact test ASTMD-256 standards were used. With the intent to evaluate the properties of transverse strength, the three-point bending (n = 10) test instrument (Lloyd NK5, Lloyd Instruments Ltd., Fareham, Hampshire, UK) was used at 5 mm/min. A Dynatup 9250 HV (Instron, UK) device was employed for the impact strength measurements (n = 10). All resin samples were tested by using a thermomechanical analyzer (Shimadzu TMA 50, Shimadzu, Japan). Mechanical tests revealed that, although the control group was found to have the value of highest transverse strength, the highest impact strength was observed in the PMMA-L-1 group. Upon examining the thermomechanical analysis data, it could be seen that the E value of the control sample was higher than that of all the other samples. Adding lignin powder into PMMA performs plasticizer effect on resin matrix.en_US
dc.identifier.doi10.1155/2013/435260en_US
dc.identifier.issn1687-8434
dc.identifier.issn1687-8442
dc.identifier.scopus2-s2.0-84893776883en_US
dc.identifier.scopusqualityQ2
dc.identifier.urihttps://dx.doi.org/10.1155/2013/435260
dc.identifier.urihttps://hdl.handle.net/20.500.12418/8832
dc.identifier.wosWOS:000328978800001en_US
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherHINDAWI PUBLISHING CORPORATIONen_US
dc.relation.ispartofADVANCES IN MATERIALS SCIENCE AND ENGINEERINGen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.titleInvestigation of Mechanical and Structural Properties of Blend Lignin-PMMAen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu