Investigation of the wear behavior of B4C reinforced Fe/Co matrix composites produced by hot press

Basit Öğe Kaydı
dc.contributor.authorSimsir, Mehmet
dc.contributor.authorOksuz, Kerim Emre
dc.contributor.authorSahin, Yusuf
dc.contributor.editorGuagliano, M
dc.contributor.editorVergani, L
dc.date.accessioned2019-07-27T12:10:23Z
dc.date.accessioned2019-07-28T10:06:11Z
dc.date.available2019-07-27T12:10:23Z
dc.date.available2019-07-28T10:06:11Z
dc.date.issued2011
dc.department[Sahin, Yusuf] Gazi Univ, TR-06500 Ankara, Turkey -- [Simsir, Mehmet -- Oksuz, Kerim Emre -- Sahin, Yusuf] Cumhuriyet Univ, Dept Met & Mat Engn, TR-58140 Sivas, Turkeyen_US
dc.description11th International Conference on the Mechanical Behavior of Materials (ICM) -- 2011 -- Como, ITALYen_US
dc.description.abstractDiamond tools are widely used for sawing, drilling and grinding materials. The extreme hardness of diamonds and the strength of the diamond/matrix combination make these tools superior. In this experimental study, diamond impregnated in Fe-Co matrix are processed by powder metallurgy method using hot pressing technique. The effects of Fe and boron carbide (B4C) additions on characteristic of diamond impregnated Co matrix composites have been investigated. The composite reinforced with and without B4C samples having three different compositions (different Fe / Co ratio) were produced under 25 MPa pressure and sintered at 900 degrees C temperature. After sinterning, hardness test was carried out and wear tests were performed by a pin-on-disc type of wear configuration. The experimental results showed that addition of Fe caused decreasing in the hardness of the matrix, and also reinforcing of B4C unaffected on the hardness of the composite. It is observed that wear resistance of B4C reinforced Fe-Co metal matrix composite was greater than that of composite without reinforcement (B4C). Furthermore, the characterization of produced composites using SEM and EDS analyses is done. (C) 2011 Published by Elsevier Ltd. Selection and peer review under responsibilitu of ICM11en_US
dc.identifier.doi10.1016/j.proeng.2011.04.528en_US
dc.identifier.endpage3201en_US
dc.identifier.issn1877-7058
dc.identifier.scopus2-s2.0-80052923495en_US
dc.identifier.scopusqualityN/A
dc.identifier.startpage3195en_US
dc.identifier.urihttps://dx.doi.org/10.1016/j.proeng.2011.04.528
dc.identifier.urihttps://hdl.handle.net/20.500.12418/9633
dc.identifier.volume10en_US
dc.identifier.wosWOS:000300451303037en_US
dc.identifier.wosqualityN/A
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherELSEVIER SCIENCE BVen_US
dc.relation.ispartof11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL BEHAVIOR OF MATERIALS (ICM11)en_US
dc.relation.ispartofseriesProcedia Engineering
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectpowder metallurgyen_US
dc.subjectboron carbideen_US
dc.subjectcompositeen_US
dc.subjecthardnessen_US
dc.subjectwearen_US
dc.titleInvestigation of the wear behavior of B4C reinforced Fe/Co matrix composites produced by hot pressen_US
dc.typeConference Objecten_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu