Search
Now showing items 21-30 of 377
Arıtma Çamuru Bertarafı ve Alternatif Stratejiler
(NOBEL, 2021)
Atık su arıtma tesislerinden gelen arıtma çamuru, küresel olarak önemli bir sorun hâline gelmektedir.
Çamurun uygun bertarafı zordur ve bileşenleri arasında yüksek oranda organik, toksik ve ağır metal kirletici içeriği ...
Investigation of nitrogen doped ZnO thin films: Effects on their structural and optical properties
(Elsevier, (2021))
Un-doped and nitrogen-doped ZnO thin films were grown by using radio frequency (RF) magnetron sputtering
method changing the nitrogen flow rate between 0% ����� 12.5% and the thickness dependence of films was
determined. ...
Anaerobic digestion of sugar beet pulp after acid thermal and alkali thermal pretreatments
(Springer Berlin Heidelberg, 2021/6)
In this study, biogas production was investigated in mesophilic conditions from sugar beet pulp (SBP). In untreated conditions, water dissolution rate was 15.5% and biogas production rate was 168.7 mL/g TS (total solid). ...
SIVAS BELEDIYESI ATIKSU ARITMA TESISI İÇIN ÖNERILEN ÇAMUR GERIKAZANIM/BERTARAF YÖNTEMLERI VE DEĞERLENDIRILMESI
(NOBEL AKADEMİK YAYINCILIK, 2021)
Ülkemiz ve dünyada yeni arıtma tesislerinin (AAT)’lerin hızla çoğalması ve bunların çoğunun kimyasal
ve biyolojik atıksu arıtma tesisi olması ve çok çamur üretmesi nedeniyle çamur oluşumu sürekli olarak
artmaktadır. ...
An investigation of corrosive effects on zirconia with different crystal structures
(Wiley, 2021)
This study aimed to compare the time-related corrosive resistance in different corrosive solution environments after sintering of zirconia with different crystal structures. The zirconia samples were produced in pellet ...
Sludge disintegration using UV assisted Sono-Fenton process,
(Springer, 2021)
In this study, the effects of combination of ultrasonic process with UV light and both classical Fenton (CFP) and modified Fenton (MFP) processes on disintegration of waste sludge were investigated. Fe2+ and Fe0 dosage, ...
Application of Photocatalysis Methods to Enhance Sludge Disintegration
(Springer, 2021)
This paper investigated the disintegration of waste sludge with different photocatalytic processes. For this objective, the effects of initial pH, reaction time, TiO2 amount with Fe2+, Fe0 and H2O2 doses on the disintegration ...
ZnO/Al2O3 layered structures deposited by RF magnetron sputtering on glass: growth characteristics, optical properties, and microstructural analysis
(Springer, 2021)
In this study, Al2O3 thin films of different thicknesses (50 nm, 100 nm, 150 nm, 200 nm, and 250 nm) were, first, grown using RF magnetron sputtering technique on glass substrate at 30 °C temperature, with 120 W power ...
Optimisation of recycled moulding sand composition using the mixture design method
(Taylor and Francis, 25.05.2021)
In the cast iron industry, mould sand quality and the most efficient recovery of used sand into the system are critical. For this purpose, the optimum values of the factors (humidity, active bentonite and coal dust) affecting ...
ELEKTROKOAGÜLASYON PROSESI ILE TEKSTIL ATIKSULARININ ARITIMI VE İŞLETME PARAMETRELERININ OPTIMIZASYONU
(Nobel Akademik Yayıncılık, Aralık 202)
Bu çalışmada, Taguchi deneysel tasarım metodu kullanılarak Elektrokoagülasyon prosesinin tekstil atıksu yunun arıtımında kullanımı ile işletme parametrelerinin optimumum şartları belirlenmiştir. Elektrokoagü lasyon prosesinde ...