İmalat Mühendisliği Bölümü: Recent submissions
Now showing items 41-60 of 67
-
Microstructure and Fatique Performance of Cu Based M7C3 Reinforced Composites
(http://www.degruyter.com, 09 March 2)Cu\Fe–Cr–C metal matrix composites (MMCs) were produced with a reinforcer addition of 6, 9, 12, 15, and 18 wt% Fe–Cr–C by powder metallurgy. The effects of sintering temperatures on Cu-based Fe–Cr–C-reinforced composites ... -
Effect of FeTi-FeB Inoculation on Shape of Carbide Reinforcements in Hypoeutectic High Chromium White Cast Irons
(http://www.degruyter.com, 16 March 2)FeTi-FeB was added to molten high chromium white cast iron in amounts of 0.5–2.5 wt% at 50 °C above the melting temperature. The samples were produced in four groups. The first group samples were investigated as cast, the ... -
Investigation of Surface Properties and FeB-Fe2B Layer Formation in Pack Boronizing of Cementation Steel
(World Scientific Publishing Co. Pte. Ltd., 01 Septemb)In this study, cementation steel was boronized at 1050∘C for 6h, 8h, and 10h. Microstructural change on the surface of the samples after boronization was detected by optical microscope (OM), scanning electron microscope ... -
Metallurgical Properties of Borid Layers Formed in Pack Boronized Cementation Steel
(http://www.degruyter.com, 06 Septemb)In the present study, cementation steel was exposed to boronizing process at 950 °C for 6, 8, and 10 h. Microstructural changes on the surface of the samples after boron operation were inspected by optical microscope, ... -
Effect of Thermomechanical Process on Mechanical Properties of CuZn10 Alloy
(http://www.degruyter.com, 07 July 20)The effects of thermomechanical processing on the grain size, tensile strength, and strain rate of a CuZn10 alloy were investigated. Microstructures of thermomechanically treated samples were introduced using a scanning ... -
Mechanical Performance and Weldability of HARDOX 450/AISI 430 Grade Joined by TIG Double Sided Arc Welding
(http://www.degruyter.com, 04 Novembe)AISI 430 and HARDOX 450 grades were combined using tungsten inert gas double-sided welding process. Microstructural changes were evaluated with scanning electron microscope, energy dispersive spectrometry, electron back ... -
Numerical Investigation of Corrugated Channel with Backward-Facing Step in Terms of Fluid Flow and Heat Transfer
(2022)In this study, the turbulent fluid flow and heat transfer through a backward-facing step connected by various triangles to a corrugated wall were numerically investigated. The governing equation was solved with Ansys Fluent, ... -
Experimental Investigation of the Effect of a Semi-Circular Spiral Protrusion on the Turbulent Flow Past a Cylinder
(2022)The effect of semi-circular spirals on a circular cylinder surface to flow structure was experimentally investigated by the particle imaging velocity measurement (PIV) method. Based on the PIV channel, the main body cylinder ... -
Microstructure and Mechanical Characteristics of AISI 304 / DUROSTAT 500 Steel Double-Side TIG Welds
(http://www.degruyter.com, 08 August )In this study, AISI 304 stainless steel and DUROSTAT 500 steel are combined using TIG double-sided arc welding. Microstructural differences of welded joints were researched by using a scanning electron microscope (SEM), ... -
Numerical investigation of CPU cooling with micro-pin–fin heat sink in different shapes
(2022)The fact that today's computers transmit too much information at effective speeds causes high heat concentrations. These heat concentrations increase the temperature of the computer processor and cause it to deteriorate ... -
Economic and environmental assessment of ground source heat pump system: The case of Turkey
(Elsevier, October 20)The use of renewable energy sources increases day by day. Although ground source heat pump systems are used to meet buildings' heating and cooling demands worldwide, high initial setup costs limit the widespread use of ... -
Energy and exergy analysis of a ground source heat pump system with a slinky ground heat exchanger supported by nanofluid
(Springer Nature, 2022)This work contains the experimental analysis results in real environment conditions of the use of Al2O3 -based nanofluid (NF) at different concentration ratios (0.1% and 0.2%) in a ground source heat pump (GSHP) system ... -
Analysis of different combustion chamber geometries using hydrogen / diesel fuel in a diesel engine
(Taylor Francis, 2021)In this study, the effects on combustion characteristics and emission were investigated in a direct injection diesel engine. In experimental and numerical studies, the engine was operated at 2000 rpm. The analyzes were ... -
Characterization of mechanically alloyed Fe based and MoNiAl+Al2O3 reinforced composites
(https://www.degruyter.com, 2021)Fe-MoNiAl-Al2O3 powders were mechanically alloyed by a SPEX type attritor. The Fe based composite samples were reinforced with complex mechanically alloyed Fe-MoNiAl-Al2O3 particles in different ratios and Fe matrix ... -
Effect of rotary friction welding on mechanical properties of 6060 Al alloy
(https://revistademetalurgia.revistas.csic.es, 2021)6xxx series of aluminum alloys are prone to cracking when fusion welded without a proper filler metal. Alternatively, these alloys can be welded by rotary friction welding, a solid-state welding process, without using ... -
Friction welding of high Cr white cast iron to AISI 1030 steel with Ni interlayer
(https://www.degruyter.com, 2021)In this study, the effect of friction time on microstructure and weldability of AISI 1030 steel with nickel interlayer and high chromium white cast iron welded by the friction welding method were investigated experimentally. ... -
Heat affected zone and weld metal analysis of HARDOX 450 and ferritic stainless steel double sided TIG-joints
(https://www.degruyter.com, 2021)In this study, AISI 430 and HARDOX 450 grade steel are joined using a double-sided tungsten inert gas welding process. The microstructural properties of weld metal and HAZ were evaluated by optical microscopy, energy ... -
Metallurgical and Mechanical Characteristics of Friction Welded Joint of 27 wt.%CrWCI/AISI 1040 Steel
(www.springer.com, 2021)In this study, metallurgical properties of AISI 1040 steel and high-chromium white cast iron joined using friction welding process was investigated experimentally. Scanning electron microscopy, optical microscopy, ... -
Farklı Yüzey Geometrisine Sahip Dönen Ve Dönmeyen Silindirlerin Akıs Ve Isı Geçisine Etkilerinin Deneysel Ve Sayısal Olarak Incelenmesi
(01.05.2021)Projede farklı yüzey geometrisine sahip dönen ve dönmeyen silindirlerin akış ve ısı geçişine etkilerinin deneysel ve sayısal olarak incelenmesi hdeflenmektedir. Projenin deneysel kısmında üst akış bölgesinde bulunan farklı ... -
Fatigue Life and Stress Analysis of the Crankshaft of a Single Cylinder Diesel Engine under Variable Forces and Speeds
(De Gruyter, 2021)In this paper, a single cylinder crankshaft manufactured with C45 steel was used to investigate variation in stress, deformation, and fatigue life and safety factor at critical locations of the crankshaft. For this ...